Instructions / Assembly

Technical Manual

Fairway Deluxe

4 Passenger 4 Sided

Enclosure

Technical Features & Advantages

Parts

[A] 1 Enclosure

[B] 1 Storage case

[C] 1 Two-piece rear panel stiffener tube

[D] 2 Black 1.5" x 22.5" grip tape strips

[E] 2 Black 1.5" x 7.25" rip-and-grip tape strips

[F] 4 Black 1" x 9" rip-and-grip tape strips

Installation

1. Drape your Enclosure [A] over your golf car. Put the short panel with the single window

at the front.

2. Roll all the side, front and back panels down.

3. Locate the two metal black tubes [C]. These are a stiffener for the rear panel. Join these

tubes into a single tube by slipping the tapered male end of one tube into a female end of

72472 (page 1 of 2) 01.29.10

Specifications

Fabric: 300D Polyester w/PVC

Color: Sand

Made in China

Size: Part #:

95” L x 48”W x 61” H 72472 Fit: All popular Four Person Golf Cars

• Fits over roof - just roll down sides when bad weather threatens

• Keeps golf cars clean and dry in storage

• Super Clear PVC windows with heavy-duty vinyl doors and top

• Installs in minutes without tools

• Six zip-open panels roll up and down independently so you can quickly and easily

adjust to any weather condition

• Roof valance covers rolled up panels

• Handy carrying case included

Straps to hold up panels are

along the roof line

Zippers for the front, back,

and side panels run along the

corners

Door entry/exit zipper

Top Measurements: 46"W x 118" L

PAGE 1
Technical Manual Fairway Deluxe 4 Passenger 4 Sided Enclosure Straps to hold up panels are along the roof line Zippers for the front, back, and side panels run along the corners Door entry/exit zipper Specifications Fabric: 300D Polyester w/PVC Color: Sand Made in China Top Measurements: 46"W x 118" L Size: 95” L x 48”W x 61” H Part #: 72472 Fit: All popular Four Person Golf Cars Technical Features & Advantages • • • • • Fits over roof - just roll down sides when bad weather threatens Keeps golf cars
PAGE 2
Installation (continued) the other tube. On the rear panel underneath the main window there is a strip of sand colored fabric. On the INSIDE of the strip on the left side there is a small hole. Insert the tube [C] into the hole and push it all the way to the right of the panel. Slip the left end of the rod under the left of the slit to hold it in. 4. Zip all the panels shut on the outside of your golf car. Straighten all the sides or your Enclosure and be sure it is centered over the roof. 5.