Owners manual

14
22640 68th Ave. S. Tel: [phone]
Kent, WA, USA 98032 Fax: [phone]
www.classicaccessories.com
Email: [e-mail]
© 2012 • 12cH56_12797
CARE AND MAINTENANCE
STORAGE
Store in a clean dry place. Never store a wet shield in an enclosed area as it can develop mildew.
Avoid folding the plastic windows of the cover for long periods.
BOLTS
Check all bolts before each use to see that they are tight. If one or more bolts come loose, failure of shield parts may occur.
WINDOWS
Don't clean the plastic windows when they are dry—you can scratch them.
Hose them with water and rub them with your bare hands. Liquid soap may be used.
During freezing weather an automotive windshield cleaner and a soft cloth will work (don't use your bare hands with the cleaner).
Fabric areas of the shield may be washed with a rag. Don't use soap as it may remove protective coatings added by the factory.
TROUBLESHOOTING
ONE YEAR LIMITED WARRANTY
The manufacturer, Classic Accessories, Inc., will repair or replace, without charge, this product which under normal usage has proven to
be defective in its manufacture or workmanship for a period of one (1) year from the date of initial retail purchase. This warranty is valid
only to the original purchaser. This warranty is not transferable and does not cover any parts that have been subjected to misuse, abuse,
alteration, overload, accident or normal wear of moving parts.
Service can be obtained by contacting Classic Accessories at 1-800-854-2315. Any shield or shield part that is returned to Classic
Accessories, together with the original sales receipt as proof of initial retail purchase, and with postage prepaid, will be repaired or replaced
without cost if the unit is found defective. This warranty does not apply to accessories or damage caused where repairs have been made or
attempted by others. All warranty work will be completed in a reasonable time, not to exceed 60 days after receiving the product.
Classic Accessories is not responsible for direct, indirect, incidental or consequential damages. Some states and provinces do not allow
limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental damages, so the above
limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to
state and province to province.
WARRANTY VOID IF PRODUCT USED FOR COMMERCIAL OR RENTAL PURPOSES OR IF THE SNOW THROWER SHIELD IS TRANSPORTED ON AN
OPEN TRAILER OR TRUCK.
Call: 1-80 0-854-2315 for Warranty Assistance, Monday - Friday 8:00 a.m. - 4:00 p.m., PST
REPLACEMENT PARTS
If parts are missing or if you need replacement parts, please call Classic Accessories customer service at 1-800-854-2315,
8 a.m. - 4 p.m., PST, Monday-Friday. Please refer to the Package Contents List for the parts list.
Problem Possible Cause Corrective Action
Shield front interferes with the
snow thrower controls.
Upper horizontal mounting bar
[A, B] is mounted too low.
1. Rotate shield forward.
2. Move shield sideways.
Shield is too low or
too close to your head.
Upper horizontal mounting bar
[A, B] is mounted too low.
1. Rotate shield forward.
2. Raise attachment point.