SDS

ManualsBrandsClassic Coatings Systems ManualsConcrete Coatings5 gal. CW404 Clear Wet Look Water Based Interior/Exterior Concrete Sealer

1. PRODUCT AND COMPANY IDENTIFICATION

2. HAZARDS IDENTIFICATION

CLASSIFICATION

GHS Classification: Not classified

Pictogram: Not applicable

Signal Word: No signal word

Hazard Statement: No known significant or critical hazards

Prevention: Not applicable

Response: Not applicable

Storage: Not applicable

Disposal: Not applicable

3. COMPOSITION/INFORMATION ON INGREDIENTS

* Toxic chemical subject to the reporting requirements of section 313 of Title III and of 40 CFR 372.

PRODUCT NAME: Wet Look Water Based Sealer

PRODUCT CODE: CW404

MANUFACTURER

CLASSIC COATINGS SYSTEMS

255 CITATION CIR.

CORONA, CA 92878

24 HR. EMERGENCY TELEPHONE NUMBER

Emergency Response Service: (800) 535-5053

SAFETY DATA SHEET

Issue Date: 12-January-2021

O: (951) 279-2600

Chemical Name

Weight %

CAS Number

2-Propanol, 1-(2-butoxy-1-methylethoxy)-

10%

29911-28-2

2-Butoxyethanol

10%

111-76-2

Water

60%

7732-18-5

Propylene Glycol

20%

57-55-6

Trade Secret

Yes

Summary of content (5 pages)

PAGE 1
SAFETY DATA SHEET Issue Date: 12-January-2021 1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: PRODUCT CODE: Wet Look Water Based Sealer CW404 MANUFACTURER CLASSIC COATINGS SYSTEMS 255 CITATION CIR. CORONA, CA 92878 O: (951) 279-2600 24 HR. EMERGENCY TELEPHONE NUMBER Emergency Response Service: (800) 535-5053 2.
PAGE 2
4. FIRST AID MEASURES EYES : Flush with water for 15 minutes. See a physician. SKIN : Wash skin with soap and water. See a physician if irritation persists. INGESTION : INGESTION: IF VICTIM IS CONSCIOUS GIVE TWO GLASSES OF WATER AND INDUCE VOMITING. CALL A PHYSCIAN (911) IMMEDIATELY. INHALATION : INHALATION: REMOVE INDIVIDUAL TO FRESH AIR. IF BREATHING IS DIFFICULT, ADMINISTER OXYGEN. IF BREATHING HAS STOPPED GIVE ARTIFICIAL RESPIRATION. KEEP PERSON WARM, QUIET AND GET MEDICAL ATTENTION. 5.
PAGE 3
7. HANDLING AND STORAGE GENERAL PROCEDURES : AVOID EXCESSIVE HEAT OR FLAME. DO NOT WELD ON OR NEAR CONTAINER. KEEP CONTAINERS CLOSED WHEN NOT IN USE. FOR INDUSTRIAL USE ONLY. KEEP OUT REACH FROM CHILDREN. WASH HANDS BEFORE EATING. 8. EXPOSURE CONTROLS\PERSONAL PROTECTION OSHA TABLE COMMENTS: NL = Not Listed EXPOSURE LIMITS Components CAS DIPROPYLENE GLYCOL BUTYL ETHER Ethylene Glycol Monobutyl Ether Limits 29911-28-2 111-76-2 PEL: 25 PPM - SKIN TLV: 25 PPM - SKIN ENGINEERING CONTROLS: LOCAL EXHAUST R
PAGE 4
10. STABILITY AND REACTIVITY STABLE : MATERIAL IS STABLE. HAZARDOUS POLYMERIZATION : Product will not undergo polymerization. CONDITIONS TO AVOID : High temperatures, open flames or sparks. HAZARDOUS DECOMPOSITION PRODUCTS: THERMAL DECOMPOSITION MAY YIELD CARBON DIOXIDE AND/OR CARBON MONOXIDE,ACRID SMOKE OR METAL FUMES WHEN HEATED TO DECOMPOSITION. INCOMPATIBLE MATERIALS : AVOID MIXING WITH STRONG OXIDIZERS OR REDUCING AGENTS. 11. TOXICOLOGICAL INFORMATION GENERAL COMMENTS: None identified. 12.
PAGE 5
16. OTHER INFORMATION NFPA CODES HMIS RATING Health : 1 Flammability: 0 Reactivity: 0 Personal Protection: B 0 1 0 B MANUFACTURER DISCLAIMER : THE INFORMATION OR RECOMMENDATIONS CONTAINED HEREIN ARE BASED ON INFORMATION OBTAINED FROM SOURCES WHICH WE BELIEVE ARE RELIABLE AND ARE PROPRIETARY AND ARE FURNISHED SOLELY FOR THE USE OF OUR CUSTOMERS.