TDS

COVERAGE:
1 gallon (3.8 Liters) covers
approximately 300 sq. ft.
to 400 sq. ft. depending
on application method
and surface conditions
PACKAGING:
1 gallon
5 gallon
55 gallons
STORAGE:
1. Store in a cool, dry
location.
2. Store out of direct
sunlight.
3. Protect pails and jugs
from weather and other
damage.
4. Store at a temperature
between 40ºF (4ºC) and
90ºF (32ºC).
SHELF LIFE:
2 years
COLOR:
Milky white - Dries Clear
© 2015 Classic Coatings Systems Inc. All rights reserved.
A FAST DRYING HIGH GLOSS WATER BASED ACRYLIC SEALER
DESCRIPTION
TYPICAL USAGE
Wet Look High Gloss Water Based Sealer
• Pool Decks
• Driveways
• Walkways
• Over stained concrete
• Restoration projects
• Architectural toppings
• Concrete oors
• Block walls
• Patios
• Masonry
• Spanish Tile
• Stucco
• Natural Stone
Repels water within 24 hours at 77ºF
Waterborne: Low VOC <50 g/l, no fumes
and low odors
Fast drying & color enhancer
Cross-Link & High UV stability
Excellent hot tire pick-up after 7 days
Excellent adhesion and durability
Low cost, easy installation, and low
maintenance
Easy to clean with soap and water
May reect working cracks in substrate
Recommended application temperature
should be between 55° F and 95° F
Must be installed over a clean and dry surface
Not freeze thaw. Not for use under water
Surface must not contain any moisture
and efflorescence
ADVANTAGES LIMITATIONS
REVISED: March 6th, 2024
Never apply adhesives over stained or sealed
surfaces as it may cause damage
If using high performance tires we recommend
using a 2 part polyurethane sealer
Classic Wet Look is a clear, single component, water based sealer that is designed to be used
over all Classic Stains, polymer modified cement toppings, masonry, pavers,
natural flagstone, and brick. It is a waterborne acrylic with low VOC and high solids. It may
be used for interior or exterior applications in a wide range of climates. It works as an
excellent water repellent, UV stabilizer, and will not yellow. Wet Look is formulated
primarily as a clear seal for applications over concrete restoration projects and pool deck
coatings, but may also be applied as a sand joint stabilizer provided the surface is
properly prepared. It is ideal for where a low maintenance and easily cleanable surface
is desired. Wet Look Water Based Sealer is environmentally safe and cleans up easily with
soap and water. Caution: Surface is slippery when wet. Add (CGG12oz) Classic Gator
Grip to combat. New concrete must cure for 28 days.
Classic Coatings Systems • 255 Citation Circle, Corona, CA 92878
Visit us online:
ClassicCoatingsSystems.com
Visit our Youtube channel
for How-to Videos and our
Instagram for inspiration!
@classiccoatingsystems /classiccoatingssystems
@simplestains