The Cimarron Pontoon Boat O W N E R ' S M A N U A L
C I M A R R O N P O N TO O N B O AT O W N E R ’ S M A N UA L TA B LE O F C O N T E N T S INTRODUCTION 4 SAFETY INFORMATION AND SYMBOLS 5 RESPONSIBILITIES OF THE OPERATOR(S) 6 PRODUCT SPECIFICATIONS & CAPACITY 7 INFLATION 8 PARTS LIST 9 ASSEMBLY AND CARE INSTRUCTIONS 10-14 CLEAN ANGLER STATEMENT 15 REPAIR AND TROUBLESHOOTING 16-17 WARRANTY 20
C I M A R R O N P O N TO O N B O AT O W N E R ’ S M A N UA L INTRODUCTION Congratulations on your purchase of a Classic Accessories pontoon boat. This manual has been compiled to help you assemble your boat correctly and operate it safely. It contains specific details of the boat, including its parts and equipment, and information on its safe operation, proper care, maintenance and repair. Please read it carefully, and familiarize yourself with your boat before using it.
C I M A R R O N P O N TO O N B O AT O W N E R ’ S M A N UA L S A F E T Y I N F O R M AT I O N A N D S YM B O L S The symbol to the left is the Safety Alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER Indicates a potentially hazardous situation which, if not avoided, will result in death or serious injury.
C I M A R R O N P O N TO O N B O AT O W N E R ’ S M A N UA L RESPON SIBILIT IES OF THE OPERATOR(S) IMPORTANT SAFETY INFORMATION • Read this owner’s manual carefully before using your pontoon boat. • This is not a life saving device. • You MUST wear an approved personal flotation device (PFD). • All safety equipment & PFDs must properly fit the user, be in good condition, and suitable for your body weight. • Know and follow all local water safety rules and boating regulations. • Do not exceed 350 lbs.
C I M A R R O N P O N TO O N B O AT O W N E R ’ S M A N UA L P R O D U C T S P E C I F I C AT I O N S & C A PAC I T Y BOAT SPECIFICATIONS Product Name: CIMARRON Pontoon Boat Dimensions: 96"L x 54"W x 29"H (top of the seat) Dry Weight: 37.5 lbs. Maximum Persons Capacity: 1 person (up to 275 lbs) Maximum Persons & Gear Capacity: 350 lbs (159 kg) Recommended Inflation Pressure: 2.5 psi (0.17 BAR) BOAT CAPACITY The person/load capacity is partly dependent on proper seating and load distribution.
C I M A R R O N P O N TO O N B O AT O W N E R ’ S M A N UA L I N F L AT I O N PROPER INFLATION During final inflation, inflate until most of the wrinkles in the fabric are gone and it feels firm to the touch, but DO NOT exceed 2.5 psi (0.17 bar) in the main air chambers. CAUTION - DO NOT OVER INFLATE YOUR PONTOON BOAT Water temperature and weather affect the air pressure in the boat. In cold weather your pontoon boat will lose some pressure because the air will contract.
Metal Frame Parts: PARTS LIST 2 Pontoon Frames Tools Needed: (left and right) Pump with cone fitting Rubber Mallet 1 Seat Frame Before you begin please unpack the carton and check that you have all your parts.
C I M A R R O N P O N TO O N B O AT O W N E R ’ S M A N UA L A S S E M B LY A N D C A R E I N S T R U C T I O N S It is important to follow these instructions to successfully and safely assemble your Classic Accessories Pontoon Boat. Please pay particular attention to the bold faced instructions and any information which has this symbol next to it.
C I M A R R O N P O N T O O N B O A T A S S E M B LY A N D C A R E I N S T R U C T I O N S A S S E M B LY A N D C A R E I N S T R U C T I O N S 1. Confirm that all the parts are present. (See the parts list on page 9). IES OR SS INA ) CE CH AC IN # CODE SIC DE RT N AS MA PA TIO CL UC OD (PR FR T ON R 2. Identify the right and left pontoons. You can identify the right and left pontoons by the “R” and “L” labels sewn on the inside of the pocket on top of each. 3. Attach the pontoons to the frames.
If you can’t press the seat platform into the seat frame you can turn the assembly upside down (so that the fabric is on the ground) and stand on the seat rails. You can also use a rubber mallet. 6. Attach the seat frame to the pontoon frames. Frame Pontoon Cam Buckle Completed seat base and seat frame Right Pontoon • Over the top and match hook and loop straps with each other. • Adjust fit with cam buckle. Repeat for the remaining strap then attach the other pontoon to its frame.
9. Secure the seat back into place. closest to the oar lock). Insert the foot pegs into Rear view of seat back assembly the pontoon frame and attach with short clevis pins. Choose a position in the middle of the adjustment range. Slide the seat stubs onto each end of the seat back frame. Next, slide the seat back panel onto the seat back frame. Then place the assembled seat back into position on the outsides of the seat frame and secure to the seat base with the two long clevis frame pins. 8.
and tightening the pontoon webbing attachment straps. The goal is to find your balance point. When you are floating in the boat it should be level in the water. 12. Assemble the oars. First assemble the two piece oars. Then remove the cotter pins from the oar locks attached to the upper part of the oars and slide the oarlocks into the brackets on the frame. Then adjust the rubber oar stops evenly on both oars for optimum rowing position. 13. The bladder repair kit.
C I M A R R O N P O N TO O N B O AT O W N E R ’ S M A N UA L C LE A N A N G LE R S TAT E M E N T Classic Accessories is a proud partner of the Federation of Fly Fishers Clean Angler program. We invite you join us in our efforts to keep your favorite waterways free of invasive, non-native species that can seriously damage them. We encourage you to visit www.cleanangling.org and take the Clean Angler pledge.
C I M A R R O N P O N TO O N B O AT O W N E R ’ S M A N UA L REPAIR & TROUBLESHOOTING Repairing Tears and Holes in Pontoon Bladders If your pontoon bladder becomes torn or punctured, use the enclosed patches to fix it. It may be necessary to take the pontoon bladder out of the pontoon skin. Look in the Troubleshooting section on the next page for this procedure. To fix a hole or tear, follow the steps listed below. 1.
TROUBLESHOOTING If your boat appears to be losing air, it might not be because of a leak. Changes in air temperature, elevation and use on cold water (which can cool the air inside the pontoon bladders) can all have an effect on the air inside the bladders. If none of these factors have changed, you may need to look for a leak. Follow the steps listed below. 1. Start by giving the pontoon skins a visual inspection.
C I M A R R O N P O N TO O N B O AT O W N E R ’ S M A N UA L WARRANTY One Year Limited Warranty If the boat, oars, carrying case or pump fail due to a defect in workmanship and materials within one year from the date of purchase Classic Accessories will repair or replace it free of charge. This warranty gives you specific rights and you may also have other rights which vary from state to state. 22640 68th Ave. S. Tel: (253)395-3900 Kent, WA, USA 98032 Fax: (253)395-3991 www.classicaccessories.
