Measurement Guide

RING INSTALLATION / MEASUREMENT GUIDE
Ideally the ring should have a diameter of a 1/2 inch to 3/4 inch larger than
the diameter of the pole.
A general rule is to place a ring every four to eight inches depending on the
fabric. Closer for heavy fabric.
When placing the curtain pole on the brackets, place one ring between each
finial and the bracket - this will anchor the curtain on both sides
RINGS WITH EYELETS
Remove a finial from one end of your curtain pole.
Slide on the curtain rings onto your curtain pole.
Re attach the finial to the end of your pole.
To attach the curtain to the rings:
Sew the rings to the fabric or attach the rings to the fabric using drapery Pins
TO INSTALL CLIP ON DRAPERY RINGS
Lay the curtain out on a flat surface.
Attach the rings, starting from the outside and working your way in. The first
clip on ring should be about 1/2 inch from the outside edge of the fabric.
Slip the clip rings over the drapery rod.
Adjust curtain as needed.