User manual

MIDI KEYBOARD CMK-2 SOFTWARE CONFIGURATION MANUAL v1.5

CMK-2 Manual 1.5.doc 2009 CLASSIC ORGAN WORKS 25

CLASSIC MIDI KEYBOARD

CMK-2-1

6. SOFTWARE CONFIGURATION

(PC Windows

and MacIntosh Users)

Introduction

Users with access to a personal computer running Windows

TM 1

or MacIntosh

TM 2

operating systems can use the

‘CMKConfig’ software (contained in the compact disc) to program additional configurations. These configuration files

describe the features of each keyboard such as output MIDI channel and the function of each piston. The software

allows users to create configuration files, change existing configuration files, and use existing configuration files.

Software Installation

The CMK-2 includes a compact disc (CD) with software allowing users to create custom configurations. To use the

software, the CMK-2 must be connected to a personal computer running the Windows operating system software

(Windows 98, 2000, XP) or MacIntosh System-X. The CMK-2 must be connected to the computer using MIDI. If

a MIDI port is not available on your computer, commercial MIDI adapters for the game port, USB port, and parallel

port may be used. A typical USB-to-MIDI converter is the M-Audio MIDIman 1x1. When the installation CD is

placed in the optical drive of your computer (CD drive), the software installation wizard should automatically run. If

however, the software installation wizard does not automatically run, follow the steps below:

For Windows:

1. Open the ‘Start’ menu and click on ‘Run’.

2. Click on ‘Browse’ and select the optical drive (CD drive) from

the ‘Look in:’ drop down menu.

3. Locate and click on a file named ‘CMK_Setup.exe’.

4. Follow the instructions in the software installation wizard

(screen captures are shown below).

For MacIntosh:

1. The CD icon will appear on the desktop. Double-click on the

icon to show its contents.

2. Drag all the files to a new folder on the hard drive. Name it

CMK.

3. Double-click on the zipped file among the list and it will open

up into a list of files.

4. Double-click on ‘CMKconfig.app’.

5. Right-click and make an Alias of this program for the dock.

Figure 11 Installing ‘CMK-2_Setup.exe’ file.

Windows is a registered Trademark of the Microsoft Corporation.

MacIntosh is a registered Trademark of Apple Computer Corporation.