Manualshelf

User manual

ManualsBrandsClassic Organ Works ManualsElectronic KeyboardCMK-2
21222324252627282930
MIDI KEYBOARD CMK-2 SOFTWARE CONFIGURATION MANUAL v1.5
28 2009 CLASSIC ORGAN WORKS CMK-2 Manual 1.5.doc
Functions of the Menus
The software has a toolbar that contains icons for five main functions. The menus can also be used:
Figure 20: Toolbars in CMK-2Config software
1. File Menu
• Open a Previously Saved CMK Configuration – Loads a configuration file (with a ‘.CMK’
extension) from the computer to the Classic CMKConfig software. The user may then edit the file as
desired.
Keyboard shortcut: Ctrl+O Windows Icon:
To begin loading a configuration go to File → Open Previously Save CMK Configuration, or use the
Keyboard shortcut, or icon shown above. A window prompting the user for a filename should appear:
The user can then select the filename and click on the ‘Open’ button, or double-click on the name.
• Save CMK Configuration File – Saves a configuration file to be stored on the computer. All
configuration files have a ‘.CMK’ extension. On the MacIntosh, the default name is ‘data’ and the file
will save with a ‘CMK’ suffix.
Keyboard shortcut: Ctrl+S Windows Icon:
To save a configuration file to the PC, go to File → Save Program Data File, or use the Keyboard
shortcut or icon shown above.
A window prompting the user for a filename should appear. Give the file a name (no need to type
.cmk) and it need not be ‘p#’. It can have any name you wish.
Tip: A single click on an existing name will put that name into the box. You can then modify it to save
some typing before you save it.
If the configuration uses the same name as a previous configuration, a warning window will ask the
user for confirmation in replacing the old file with the newly-revised one.
• Load Current Settings from the CMK – Loads the configuration file from the CMK-2 memory chip.
There is only the one configuration.
Keyboard shortcut: Ctrl+L Windows Icon:
To load a configuration from the CMK-2 memory chip, the user must ensure that the CMK-2 is
connected to power and to a computer using a MIDI cable (see Software Installation for details on