User manual

MIDI KEYBOARD CMK-2 SOFTWARE CONFIGURATION MANUAL v1.5
30 2009 CLASSIC ORGAN WORKS CMK-2 Manual 1.5.doc
• Write Program Data to CMK – Saves a configuration file to the CMK memory chip. Typical CMK
units have only the one file in memory.
Note: The configuration file for a multi-keyboard system contains data for all the keyboards. If you
save the configuration back to such an installation, it will write the appropriate information to them.
Unchanged keyboard data will simply be resaved to where it came from. See Figure-6.
Keyboard shortcut: Ctrl+W Windows Icon:
To save a configuration to the CMK-2, go to File → Write Program Data to CMK or, use the keyboard
shortcut or icon as shown above. The Software attempts to make a connection to the CMK-2.
Figure 25: Requesting CMK Configuration
A window should appear to confirm that the contents were written.
Figure 26: Confirmation Window.
2. Edit Menu
• Copy and Paste – Two file icons are for Copy and paste functions and are greyed out as not
applicable. They are not used in this software.