User manual

MIDI KEYBOARD CMK-2 SOFTWARE CONFIGURATION MANUAL v1.5
36 2009 CLASSIC ORGAN WORKS CMK-2 Manual 1.5.doc
2. Expression Shoe Functions
Each manual has three Analog Inputs that can be configured for either Expression or
Volume Control. To select these functions, click on the drop-down menus and set the
shoe functions as desired.
The Analog Inputs are used for either an expression shoe or a volume control. Volume would
typically be used for an Ahlborn Archive module while Expression would be used for Hauptwerk.
Volume sets the overall maximum loudness while Expression varies volume level from a minimum
up to that overall level. Other MIDI sound generators may use either. Consult their manuals for
details.
It is possible to use an input for Ahlborn Crescendo but this is set in General Settings, not here. See below.
3. General Settings
This window shows a list of the various manual (hardware configuration) functions that can be enabled or disabled via
tick boxes. The various manual keyboard shortcuts are also shown using the pistons (P1 is Piston #1, Left, SET. The
others are the first seven black keys).
These shortcuts are detailed in 5. Hardware Configuration.
Transposition here is a simple on/off function. The actual range should be set in the MIDI Settings tab window or
manually.
The Ahlborn Archive Crescendo settings are unique to Ahlborn Archive modules and would typically use Input #3 on
MIDI Channel #16. If not required, set its analog input to ‘Disabled’.