User manual

MIDI KEYBOARD CMK-2 SOFTWARE CONFIGURATION MANUAL v1.5
CMK-2 Manual 1.5.doc 2009 CLASSIC ORGAN WORKS 39
BANK SELECT: Gives choice of MSB, LSB, Program Change number and MIDI Channel 1-16.
CM-100 TREMULANT: Gives range of 0-127 for Tremulant Depth only, and MIDI Channel 1-16.
CM-100 CANCEL: No Choice, the piston will simply turn off all CM-100 stops.
NOTE ON/OFF: Gives choice of 0-127 where Middle-C is 24, on MIDI Channel 1-16. The individual note turns On
when pressed and Off when released. This might be used, perhaps, to operate a percussion sound on MIDI Channel-10.
See Appendix-F for General MIDI Sounds.
ALL NOTES OFF: Effectively a Divisional Cancel piston to overcome stuck notes on one MIDI Channel (1-16).
CLASSIC:
CLASSIC Function: Allows user to directly control Classic Control Systems
CASE NUM CASE NUM CASE NUM
Divisionals
00-0E
0-F Generals,
First Set.
0F
0-F Combo Action
Memory, Direct
Access 10
0-F
Generals, Second
Set. 11
0-F Cancels
12
Div. 0-E
Gen. F
Sforzando
13
0-7
Ventils
14
0-7 Control, Up/Down
MEM, Reg. Seq.,
Transp., SETUP 15
0-3 Special Functions
Lighted Rev. First Set
16
0-7
Lighted Rev.
Second Set
17
0-F Piston Couplers
18
1-7
(not 0)
Coupler Rev.
First Set
19
0-F
Up/Down
1A
0 Up
1 Down
Reg. Sequencer
1B
0 Next
1 Last
Recall
1C
0
Coupler Rev.
Second Set
1D
0-F MIDI Memory
Direct Access
1E
0 Up
1 Down
Transpose
1F
0 Up
1 Down
2 Cancel
Spare
Unused
20
0 MIDI Stop
Direct Access
21
0-F Crescendo
Memory
22
0 Alterable
1-3 Select
MIDI Sustain
23
0 Settable Tab
Reversibles
24
0-F Spare
Unused
25
0
SET/ALT
26
0 Memory Lock
27
0 Unlock
1 Lock
Other Tabs Off
Reversibles
28
0
Player
29
0 Play
1 Pause/File
2 Record
MIDI Sequencer
Program Number
2A
0-F MIDI Sequencer
Program Number
2B
0-F
MIDI Expander
Program Number
2C
0-F MIDI Expander
Program Number
2D
0-F Misc. Up/Down
Special
2E
0
Coupler Rev.
Third Set
2F
0-F Numeric Hex Display
30
0 Lighted Rev.
Third Set, Special
31
0