User manual

MIDI KEYBOARD CMK-2 APPENDIX-B AHLBORN MESSAGES

CMK-2 Manual 1.5.doc 2009 CLASSIC ORGAN WORKS 51

Table 17: Additional Piston input commands

[8]

Group No.

Data sent:

Off ----> On

Data sent:

On ----> Off

Description Note

5A Cn 40 Ahlborn – Division Cancel 1

5E BF 47 46 BF 47 06 SET piston 2

5F BF 47 42 BF 47 02 SFZ control 3

NOTES:

1) Prog. Change 51-85 (32h - 54h) on a Division Channel (1-4) will actually act as a Divisional Cancel.

2) Works with General Pistons to allow setting them via remote (MIDI) control, i.e., press & hold SET; press and release a

General, then release SET; to store a new registration.

3) Should allow for a lamp output for this. Also, possible another input function which would act as a "reversible"; i.e., push-

ON, push-OFF.:

4) n = Channel number used by Ahlborn stop On/Off messages; defaults to 16 (Fh).

Table 18: Analog input function commands

[8]

Input Data sent Function Div. Description Note

1 CF ss Crescendo Crescendo 1

2 B0 07 aa Sw Ahlborn – Division Volume 2

3 B1 07 aa Gt Ahlborn – Division Volume 2

4 B2 07 aa Ch Ahlborn – Division Volume 2

5 B3 07 aa Pd Ahlborn – Division Volume 2

Bn 65 00 64

01 06 xx 26 yy

Tuning

Tuning and/or Temperature

Sensor

NOTES:

1) "ss" is the Crescendo stage, where Off=64h, Stage#1=65h, #2=66h, etc., #11=6Fh, #12=77h, #13=78h, etc., #20=7Fh.

2) Ahlborn modules use Controller #7 for expression. Outputs on Ahlborn channels (1-4) must be configurable, connecting to

analog inputs 2-5. aa = volume value from an analog input, where 0<aa<127.