Instructions / Assembly

Sandset Patio Building Step By Step
Using Precast Concrete Pavers
Step 1: Excavate patio area:
Step 2: Screed and compact sand and base:
- Use the Paver Base to level your excavated patio area.
- Use 3/4" rigid conduit as your screed rail to evenly distribute 1" of Base or
sand.
*All instructions are based on pedestrian traffic only.
Step 3 continued:
- Compact the base layer and the sand layer separately. Use a tamp (typically
8" x 8" plate) to compact layers.
Step 4: Install perimeter containment:
Paver = 1.5"
Sand = 1" Maximum
Base = 1" Maximum
Excavate 3.5" to
allow for layers.
Existing Ground
Level.
Base = 1" Maximum
Existing Ground
Level.
Screed Board
3/4" conduit as
screed rail.

Summary of content (3 pages)