User's Manual

P. 3
SPEAKER RECEIVERS
1. Insert 6 pieces ‘AA’ size ALKALINE batteries into the battery compartment with
correct polarity at the back of each speaker (batteries not included in the
package) or connect the 12V power adaptor to the DC input jack on the back of
each speaker, then plug them to the wall AC outlet.
2. Tune the On/Off button of the speakers to ON position and adjust the volume
level. The POWER LED at the front will light up in green. Switch off the
speakers by tuning the ON/OFF button to OFF position, the LED will become
off.
OPERATION
1. Turn on the audio source (TV or audio component) to which the transmitter is
connected with.
2. The best channel out of 8 channels on the transmitter will be automatically
selected for the best performance.
3. Turn on the ON/OFF button on the speakers. Press
the “CHANNEL” button to get the best channel in the
speakers if you find any bad reception.
4. You can adjust the volume to your desired listening
level by tuning the volume button.