User's Manual

P. 4
5. You should now be able to place your speakers freely from room to room
without disruption. Should there is any disruption (signal cuts off or carries
distortion), press the speaker’s “CHANNEL” button to maximize the best
reception.
If you could still hear the interference, press the “CHANNEL” button on the
transmitter as well.
When transmitting / receiving over long distances, the signal from the system will
become weaker.
This device must be used with the AC/DC adapters supplied in the package.
TROUBLE SHOOTING
NO SOUND
- Ensure the AC/DC adaptor is fully inserted into the AC outlet and the
power connection input on the transmitter.
- Ensure the speakers are ON.
- Speaker’s battery capacity is too low, replace with new batteries or
connect the AC/DC adaptor to the speaker.
- Ensure the TV or audio component is ON.
- The connected audio / video equipment is not playing. Start playing the
equipment.
- The volume of speakers are too low, adjust the volume to an appropriate
level.
DISTORTED
- Press the “CHANNEL” button on the speakers.
- If there is still interference, press the “CHANNEL” button on the
transmitter until matching the frequency of the speaker.
- Battery capacity is too low. Replace with the new battery.
- Ensure the volume levels of speakers are adjusted properly.
- The speakers are too far away from the transmitter, move it closer.
- The input level of the audio signal is too high. Turn down the volume of
the audio source equipment.