User's Manual

P.8
For Speakers
1. Turn on the ON/OFF button on the speakers. Press the “AUTO-SCAN” button to
get the best tuning reception in the speakers. When the button is pressed,
frequency tuning starts automatically and it stops when a signal is detected.
2. Volume can be adjusted up by tuning the volume knob on the right sides of the
speakers to the desired listening level.
3. Whenever you find frequency jam, move your channel switch from one channel
to the other channel (there are two channels for selection) on the transmitter,
and then press the “AUTO-SCAN” button on the speakers again.
4. Using the Normal/Bass Boost control to amplify the bass sound of the speakers
to your personal preference.
For Headphone
1. Place the headphone On/Off switch in the On/position. The Power LED will
illuminate.
2. Before placing the headphone on your head, make sure the headphone is not at
high volume, as such use can cause serious damage to your hearing. To obtain
the desired sound level, you can adjust the volume control on the headphone.
3. Whenever you find frequency jam, move your channel switch from one channel
to the other channel (there are two channels for selection) on the transmitter,