User manual

33
Arrangement of control elements
1 Filling tray 9 Knife
2 Motor 10 Plug
3 Switch ON/0/R (On/Off/
reverses)
11-13 Perforated discs
14 scroll
4 Safety switch „Forward/
reverse“
15 scroll housing
16 Pusher
5 Screw 17 Connection scroll
housing
6 Threaded hole
7 a + b Attachment
„Kebbe“
Without illustration
8 Sausage attachment 2-part cookie attachment
Intended use
This appliance serves
- Cut up foodstuff
- You can shape noodles or dough with different
attachments.
It is exclusively intended for this purpose and may be only
used appropriately.
It may only be used in the manner described in these
operating instructions.
You may not use the appliance for commercial purposes.
Use for any other purpose is considered improper and
not for the intended purpose and can result in damage to
property and personal injury.
Clatronic International GmbH is not liable for damages
caused by non-intended use.
Assembly of the meat grinder
Please also observe our illustrations under "A".
1. Insert the scroll housing into the mounting on the motor.
2. Lock the scroll housing into position with the screw.
3. Insert the scroll.
4. Insert the knife with the sharpened edge outwards onto
the shaft of the scroll.
5. Select a perforated disc.
NOTE :
• Slightly grease the perforated discs beforehand with
vegetable fat.
• The guides on the perforated disc are located in the
recesses on the scroll housing.
6. Rotate the catch clockwise.
7. You can now attach the fi lling tray with whatever you
want to grind.
See below "Electrical connection".
Mounting of the "Kebbe" attachment
NOTE :
Tubes of meat or dough paste can be made with the
"Kebbe" attachment.
Please also observe our illustrations under "B".
First proceed as described in "Assembling the meat
grinder" Item 1 to Item 3.
1. Position the 2-piece Kebbe attachment on the shaft of
the scroll.
NOTE :
The guides on attachment (A) are located in the recesses
on the scroll housing.
2. Rotate the catch clockwise.
3. You can now attach the fi lling tray with your meat or
dough mixture.
See below "Electrical connection".
Assembly of the sausage attachment
Please also observe our illustrations under "C".
First proceed as described in "Assembling the meat
grinder" Item 1 to Item 5.
1. Position the sausage attachment on the scroll housing.
2. Rotate the catch clockwise.
3. You can now attach the fi lling tray with whatever you
want to grind.
See below "Electrical connection/Application instructions".
Assembly of the cookie attachment
NOTE :
You can shape different forms with this attachment after
preparing a cookie dough. This is particularly suitable for
so-called Spritzgebäck.
First proceed as described in "Assembling the meat
grinder" Item 1 to Item 3.
1. First, insert the disc onto the extension of the scroll
shaft.
NOTE :
The guides are located in the recesses on the scroll
housing.
2. Then mount the shaping disc.
3. Rotate the catch clockwise.
4. You can now attach the fi lling tray with your dough.
See below "Electrical connection/Application instructions".
ENGLISH