OWNER'S MANUAL
CAUTION RISKOFELECTRICSHOCK DONOTOPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. l Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus 6 Clean only with dry cloth. 7 Do not block any ventilation openings, lnstall in accordance the manufacturer's instructions.
ri¢l'._]Mif_'hV/ll__,T._:ljlhVl_.'#lgilmro,_l[O]Av_ FCC INFORMATION 1. IMPORTANT NOTICE: DO NOT MODIFY (for US customers) THIS UNIT! Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is lbund to be the source of interference, which can be determined This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements.
1 To assure the finest performance, please read this manual WARNING carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place with at least 5 cm (2 in) of space above (or below) this unit - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. 3 Locate this unit away from other electrical appliances, transtbrmers to avoid humming sounds.
Overview ................................................................. Features .................................................................. Using this manual .................................................. Supplied accessories .............................................. Controls and functions .......................................... Front panel ................................................................ Front panel display ...................................................
It is generally accepted that in order to fully enjoy the benefits of surround sound at home, you must endure the agony of wiring and installing a great number of speakers in the hope that your listening room will give you the same kind of surround sound experience as your local movie theater. Yamaha YSP-4000 Digital Sound Projector challenges this preconception that complicated speaker setup and troublesome wiring go hand-in-hand with the enjoyment of multi-channel surround sound.
Digital Sound Projector Compatibility with the Newest Technologies TM The Digital Sound Projector technology allows one slim unit to control and steer multiple channels of sound to generate multi-channel surround sound, thus eliminates the need for satellite loudspeakers and cabling normally associated with conventional surround sound systems.
iH;.*_, bf #ld_r_: Inte\liBeam The "lnte\llBeam" logo and "IntelliBeam" are trademarks of YAMAHA CORPORATION. The "_" logo and "Cinema DSP" are registered trademarks of YAMAHA CORPORATION. Manufactured under license from 1 Ltd. Worldwide patents applied for. The" "logo and "Digital Sound Projector _'M''are trademarks of 1 Ltd. SRSCO DIGITAL Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories.
• This manual describes how to connect and operate this unit. For details regarding the operation of external components, refer to the supplied owner's manual for each component. • Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified. • -%'--indicates a tip for your operation. • This manual is printed prior to production. Designs and specifications are subject to change in part as a result of improvements, etc.
Check that you have received all of the following parts. Remote control (×1) Fasteners (x4) Optical cable (xl) Cable clamp (xl) Digital audio pin cable (xl) (Orange) IntelliBeam microphone (×1) Audio pin cable (×1) C_ C_ C_3 Cardboard microphone stand (×1) (White/Red) _YAMAHA REFERENCE (iPod/XM (U.S.A. and Canada models) GUIDE Radio) (×1) _Y_PJ_A XSP-#OOO Batteries (x2) (AA, R6, UM-3) ? Indoor FM antenna ,:; (×1) II II I (U.S.A.
! 0 t AUX 3 INTELLIBEAM II 0 MIC (!) Remote control sensor Receives infrared signals from the remote control. Front panel display Shows information about the operational status of this unit. @ AUX 3 input jack (_) VOLUME +/Controls the volume level of all audio channels (see page 49). STANDBY/ON Turns on the power of this unit or sets it to the standby mode (see page 33). Connect your portable audio player (see page 27).
l_om I_,1_-'_u [, il ql 1.1 fl, lli . Q eu|n •,,,, umu uJu eHme uno Nmu u|H nne auu mlmlm "" nu| nno lemH uut |nu =Hmm mHn nun uHi uH| Imlll ImlJl OIIIm /fill IIIJl HDMI indicator _) NIGHT indicator Lights up when the signal of the selected input at the HDMI IN jack(s). TUNER input source is indicators SLEEP indicator FM: Light up when this unit is receiving an FM broadcast. XM: MEMORY flashes during the XM preset operation (U.S.A. and Canada models only).
_Ti;R'_l.-_.;.rwJllt.r_Jf{Oll The illustration (U.S.A. below shows the rear panel of the U.S.A. and Canada b models. and Canada models) I IR-OUT 1 --OlGITALIN-- (_) AUX 1 HDMI IN jack Connect your digital satellite tuner, cable TV tuner, digital air wave tuner, or game console via an HDMI connection (see page 22). DVD HDMI IN jack Connect your DVD player via an HDMI connection (see page 22).
XM antenna jack (U.S.A and Canada models only) Connect your XM Mini-Tuner Dock (sold separately) (see page 5 in the Reference Guide). IR IN terminal This is a control expansion terminal for commercial use only (see page 30). (_ RS-232C terminal This is a control expansion terminal for commercial use only (see page 30). SYSTEM CONNECTOR terminal (U.S.A. and Canada models only) Use to connect a Yamaha subwoofer equipped with a SYSTEM CONNECTOR terminal to this unit.
Thissection describes thefunctions oftheremote control usedtocontrolthisunit.Some buttons marked withan asterisk (*)share thecommon functions between theYSP andTV/AVoperation modes (6_9)). _%',. Youcanalsocontrol other components using theremote control once yousettheappropriate remote control codes. See "Controlling other components" onpage 104fordetails. L @ (_) Infrared window Outputs infrared control signals. Aim this window at the component you want to operate.
II*rll;lr_--_. _ i, l,| i,iil,i ll,ll F DVD player/VCR control buttons RETURN Control your DVD player or VCR (see pages 105 and 106). Selects sleep timer settings or returns to the previous SET MENU screen. My Beam microphone Collects the test tones from this unit when using the My Beam auto-adjust function (see page 63). _) TV VOL +/- @ TV POWER Changes the channels of your TV, digital satellite tuner, cable TV tuner, or VCR (see pages 104 and 106).
_rqflflplt-'lclllq[Iq#I_.rol.t, This section describes the functions of the remote control (S) PRESET/TUNE used to control FM, Radio Data System, or iPod when the TV/AV mode is selected with the operation mode selector ((7)). Note that the Radio Data System controls are available for Europe model only, and the iPod controls are available for Australia model only. FM: Switches between the preset search mode and the frequency search mode (see pages 51 to 54). Numeric buttons FM: Enter numbers.
I[_ili'_ra'glt_.._.tmt, titllmt_lt,11 F This section describes the functions of the remote control used to control this unit. Some buttons marked with an asterisk (*) share the common functions between the YSP and TV/AV operation modes (_). _.,+,.. Youcan also control other components using the remote control once you set the appropriate remote control codes. See "Controlling other components" on page 104for details. Q Infrared window Outputs infrared control signals.
P_ril"fl_'g2b"lr:lmlojlqllI_fP11F DVD player/VCR control buttons Control your DVD player or VCR (see pages 105 and 106). My Beam microphone Collects the test tones from this unit when using the My Beam auto-adjust function (see page 63). TV POWER Turns on the power of your TV or sets it to the standby mode (see page 104). AV POWER Turns on the power of the selected component or sets it to the standby mode (see pages 105 and 106).
J[_k"l_.ll[e_llllINl[e]|_. This section describes the functions of the remote control used to control FM, XM Satellite Radio, or iPod when the TV/AV mode is selected with the operation mode selector Q PRESET/TUNE FM: Switches between the preset search mode and the frequency search mode (see pages 51 to 54). Numeric buttons FM, XM: Enter numbers. Cursor buttons ® @ /'- / _z / <_/ D, ENTER FM: Use ENTRY # (A/_) to change the preset station number (1 to 8) or frequency level (see pages 51 to 54).
This section describes a suitable installation location to install this unit using a metal wall bracket, a rack or a stand. Depending on your installation environment, connections with external components can be done before installing this unit. We recommend that you temporarily place and arrange all components, including this unit, in order to decide which procedure should come first.
• Installation examples Example 1 Install this unit as close to the exact center of the wall as possible. Example 2 Install this unit so that the sound beams can be reflected off the walls. k______.J Example 3 Install this unit as close to the exact front of your normal listening position as possible. ! 18 E.
• Using a metal wall bracket You can use the optional metal wall bracket (such as SPMK30) to mount this unit on the wall in your listening room. • Usinga rack You can install this unit either above or under your TV in a commercially available rack. Metal wall bracket C:3_=_==0 When this unit is installed above your TV I =======r-1 I lU This unit 13/ YSP-4000 When this unit is installed under your TV 730 SPM-K30 (Option) _%,.
This unit is equipped with the following types of audio/video input/output jacks/terminal: For audio • • • • input For audio output 2 optical digital input jacks 2 coaxial digital input jacks 2 sets of analog input jacks 1 universal dock terminal (U.S.A.
• Cables used for connections • Affixing cables To prevent cables from becoming unplugged, place the supplied cable clamp with the open side facing upward, attach it to the rear panel of this unit in a suitable position, and then affix cables in the cable clamp.
lOlelllttb:l_,llltOlil¢ This unit is equipped with 2 HDMI input jacks and 1 HDMI output jack. If your TV and other components have HDMI jacks, use HDMI cables for simpler and easier connections, and you can skip the connection procedures from page 23 to 26. If your TV has a built-in digital satellite tuner and an optical digital output jack, connect the optical digital output jack on your TV to the TV/STB OPTICAL DIGITAL IN jack on this unit.
m'le]lll|_f|elmP: For audio connection, connect the analog audio output jacks on your TV to the TV/STB AUDIO IN jacks on this unit. If your TV has an optical digital output jack, connect the optical digital output jack on your TV to the TV/STB OPTICAL DIGITAL IN jack on this unit. For video connection, connect the video input jack on your TV to the VIDEO OUT jack on this unit to display the OSD for easy viewing when you adjust the system parameters in SET MENU.
For audio connection, connect the coaxial digital output jack on your DVD player/recorder to the DVD COAXIAL DIGITAL IN jack on this unit. When you connect this unit to your DVD/VCR combo player/recorder, connect the analog audio output jacks on your DVD/VCR combo player/recorder to the AUX 1 AUDIO IN jacks on this unit in addition to the coaxial digital audio connection. For video connection, connect the video output jack of your DVD player/recorder to the DVD/AUX 2 VIDEO IN jack of this unit.
PlO]llll:loiflO]l_ For audio connection, connect the optical digital output jack on your digital satellite tuner or cable TV tuner to the TV/ STB OPTICAL DIGITAL IN jack on this unit. Connect the analog audio output jacks on your digital satellite tuner or cable TV tuner to the TV/STB AUDIO IN jacks on this unit. For video connection, connect the video output jack of your digital satellite tuner or cable TV tuner to the STB VIDEO IN jack of this unit.
I[w,J..:r,_tfolll.' For audio connection, connect the TV/STB AUDIO IN jacks on this unit to the analog audio output jacks on your TV. Connect the optical digital output jack on your digital airwave tuner to the TV/STB OPTICAL DIGITAL IN jack on this unit in addition to the analog audio connection. By doing so, you can enjoy both analog and digital broadcasts. For video connection, connect the video output jack of your digital airwave tuner to the STB VIDEO IN jack of this unit.
P'&olmlm_[,.lf[O]l t Connect the analog audio output jack on your portable audio player to the AUX 3 input jack on the front panel of this unit. Front panel of this unit I _11n l ii inl ii I in i i ii i ii "n:'?'°1 _] 4 Por_ble audio player 3.
I[w.:mr_'jfl, ilF If your component supports optical digital connections, connect the optical digital output jack on your component (e.g., DVD player/recorder) to the AUX 1 OPTICAL DIGITAL IN jack on this unit. If your component does not support optical digital connections, connect the coaxial digital output jack on your component to the AUX 2 COAXIAL DIGITAL IN jack on this unit. If your component does not support any digital connections, connect the analog audio output jacks on your component (e.g.
Connect the monaural input jack on your subwoofer to the SUBWOOFER jack on this unit. This connection alone does not output sound from the connected subwoofer. To output sound from the connected subwoofer, turn on the power of your subwoofer and then run AUTO SETUP (see page 37) or select SWFR for BASS OUT in SUBWOOFER SET (see page 82). When connecting a Yamaha subwoofer equipped with a SYSTEM CONNECTOR terminal, connect it to the SYSTEM CONNECTOR terminal on this unit (U.S.A. and Canada models).
J[_[fP] i J i [;._l_ l [I] l l_ Connect the supplied FM antenna to the FM ANTENNA jack on this unit. FM indoor antenna (supplied) FM75_ ANTENNA UNBAL. I COMPONENT COMPONENTISUB_FER Rear panel of this unit _STB_ DVD/AUX VIDEO IN 2 AUX 1 The RS-232C, IR-OUT, and IR IN terminals do not support normal external component connections. They are control expansion terminals for commercial use only. Rear panel of this unit (U.S.
W,Jnlmt:_,Vf_ell F Once all other connections are complete, plug one end of the AC power supply cable into the AC IN terminal of this unit and then plug the other end into the AC wall outlet. Rear panel of this unit (U.S.A. and Canada models) I I AC IN To the AC wall outlet 4,,,-, (( )} The type of the power plug is different depending on the models.
Remove the transparent sheet before using the remote control. 1 Press and hold the /_ mark on the battery cover and then open the cover. The remote control transmits a directional infrared beam. Use the remote control within 6 m (20 ft) of this unit and point it toward the remote control sensor of this unit during operation. Insert the two supplied batteries (AA, R6, UM-3) into the battery compartment. Make sure you insert the batteries according to the polarity markings (+/-).
2 Press STANDBY/ON again to set this unit to the standby mode. When this unit is in the standby mode, only STANDBY/ON on the front panel or on the remote control is operational, and the other control buttons on the front panel or on the remote control are not operational until the power of this unit is turned on. (U.S.A. and Canada models) Press STANDBY/ON to turn on the power of this unit. The volume level appears in the front panel display, and the current input source and beam mode are displayed.
This section describes how to display the OSD (on-screen display) of this unit on your TV screen and to set the parameters for your listening room. Once this is complete, you can enjoy real surround sound while watching TV in the comfort of your own home. Check that the video input jack on your TV is connected to the VIDEO OUT jack on this unit to display the OSD of this unit. 2 4 Set the operation mode selector to YSP, 5 Press MENU. Press STANDBY/ON to turn on the power of this unit.
14.'llll,_f:tlEt_l=hVll The following diagram illustrates the overall flow of the setup procedure. Run LANGUAGE SETUP. See "Changing OSD language" on page 36. Run AUTO SETUP (IntelliBeam). See "AUTO SETUP (IntelliBeam)" on page 37. If an error occurs Look for a remedy. See "Error messages for AUTO SETUP" on page 43 for a complete list of error messages and possible remedies. Play back audio signals or adjust the settings for the beam mode and the CINEMA DSP.
This feature allows you to select the language of your choice that appears in SET MENU of this unit. 1 Set the operation mode selector to YSP. 4 Press A / _ to select the desired language, and press ENTER. Press MENU. The SET MENU screen appears on your TV. MENU ÷ .MEMORY •AUTO SETUP •NAHUAL SETUP .LANGUAGE SETUP [_-] / [T] : Ijp/[),]l_jn [ EHTER] : Er, t.eP • The control buttons used for SET MENU are displayed at the bottom of the screen.
This unit creates a sound field by reflecting sound beams on the walls of your listening room and by broadening the cohesion of all the channels. Just as you would arrange the speaker position of other audio systems, you need to set the beam angle to enjoy the best possible sound from this unit.
W;fl#ge]k'f_lll',_ll_F_l[I;s_.t.i The supplied IntelliBeam microphone collects and analyzes the sound that this unit produces in your actual listening environment. Follow the procedure below to connect the IntelliBeam microphone to this unit and make sure that the IntelliBeam microphone is placed in a proper location and that there are no large obstacles between the IntelliBeam microphone and the walls in your listening room.
Once the IntelliBeam microphone is firmly connected to this unit and properly placed in your listening room, tbllow the procedure below to start the AUTO SETUP procedure. You can also enter the AUTO SETUP procedure simply by pressing and holding AUTO SETUP for more than two seconds. In this case, this unit performs both of the beam optimization and sound optimization procedures.
W_,1111[eJ.'*] _l ll] =ifl'fl l':J/In =x..._,l __, 3 The SET MENU screen appears on your TV. • Make sure that your listening room is as quiet as possible while this unit is performing the AUTO SETUP procedure. • To achieve the best results possible, evacuate yourself from your listening room until the AUTO SETUP procedure is completed so that you may not obstruct the path of sound beams. MENU • Be advised that it is normal for loud test tones to be output during the AUTO SETUP procedure.
_|llg@i._]_glJ_Jrll_Ylfl:I:_:.ljij 5 Press /'- / _ OPTIMZ, OPTIMZ to select BEAM only and then The following 6 BEAM+SOUND OPTIMZ only, or SOUND starting the AUTO SETUP procedure. • Is the IntelliBeam microphone firmly connected to this unit? press ENTER, screen appears Check the following points once again before on your TV.
W,.I lj ge]_'l =mil] 8 :JI RT_ l rl _-1:_:4 . : Check that the following screen is displayed on your TV. g The results of the AUTO SETUP procedure are displayed on your TV. Example Press ENTER to confirm the results or press RETURN to cancel the results. The following screen is displayed for two seconds and then disappears from your TV. I .,'ML, L.J E",uLI ,'! h'[l P', ,"I I "P AUTO SETUP F:LTMPLETE < -- HERSUREr'IENT COMPLETE Plea.--.e r.er,_ove the r'11c?r.
_| #/i ge]_',] =WE IJ _rl r_ i_ l fl =,;::F:1. ! • Error messages for AUTO SETUP Before the AUTO SETUP procedure starts See Error message ERROR E-2 No MIC detected. MIC connection Please Cause check The lntelliBeam microphone connected to this unit. Remedy is not Connect the IntelliBeam this unit. page microphone to 38 and re-try. While the AUTO SETUP procedure is in progress If one of the errors listed below except E- 1 is displayed, press RETURN.
3 Press A / _ ENTER. to select MEMORY and press The following screen appearson your TV. You can save the current settings adjusted in SET MENU in the system memory of this unit. It is handy to save certain settings according to the varying conditions of your listening environment. For example, if there are curtains in the path of sound beams, the effectiveness of the sound beams will vary depending on whether the curtains are open or closed. When the curtains are open '... L ,..
5 Press A / _ to select MEMORY1, MEMORY2, or MEMORY3 and press ENTER. The following screen appears on your TV. .-=',',ir_,i-_r=ii;.-.t =- ,'.,i'i:nur,,i' :,HVL You can recall the settings saved in "Saving settings" on page 44 according to the varying conditions of your listening environment. 1 Set the operation mode selector to YSP. 2 Press MENU. The SET MENU screen appears on your TV. MEr'lORYt Sa,,,e Now ? F'u'--.h [ENTER] to Sa,.
_ J_lJle 4 i dmf_v_ t_m J mm J f_ mtaro j_ _ Press A / _ to select LOAD and press ENTER. 6 The following screen appears on your TV. Press ENTER again. The new parameters saved as MEMORY1, MEMORY2, or MEMORY3 are loaded. Once the parameters are loaded, the display returns to the SET MENU screen. LORD _ml.mI I_ ,, iLiil.i lvl',, i ', MEHORYI L Loading -%> '_:,[vii";','h'irdi I ,'!i"l_'t I II'I#" ql ,I. _-i .i'1 kJ."==V ÷ HEr,iORY1 HEi',IOR'v'2 i"IEMORY3 [i]/[v] :Select [ENTER ]:Enter ÷ .
• You can play back sound from the components connected to this unit simply by pressing INPUT on the front panel repeatedly or pressing one of the input selector buttons (TV, STB, DVD, AUXI, AUX2, or AUX3) on the remote control. The name of the selected input source and the type of corresponding input mode appear in the front panel display. Front panel operations Press INPUT on the front panel repeatedly to toggle between TV, STB, DVD, AUXl, AUX2, and AUX3.
lum,pT1-q Press AUX1 (or AUX2) to play back a component connected to the AUX 1 (or AUX 2) jack on the rear panel of this unit. Switch to the video input on your TV using the remote control supplied with the TV and display the DVD menu screen. Note If necessary, turn down the volume of your TV until no sound is heard. Lll:.:I1 I:tLITO ,= 3 Press DVD to select DVD as the input source. Press AUX3 to play back a component connected to the AUX 3 input jack on the front panel. 4 lZlLI,.'.,.
• Muting the sound .......... i_ii_ii_i_iiii!_!iii_iii!_!_i!i_ii_!_!_!i!_!_!i!!_i!!i_i_ _!i!i%_iii_i%ii_iiiii!ili!_!ii%!i!_!ii_!i!iiiiii_i!iii% ii!iiiiili!ii!iiti,_iil _ .... _!!_!!!_!_!_!_!i_!_!!_i!_i_!i!_!_!_!_!!!i_!!i_i!!_!!!!!!_!i!_!!_!!_!_!_i_i! _ Press MUTE to mute the sound. "AUDIO MUTE ON" appears in the front panel display, and the volume level indicator flashes. MUTE RI_IDiO NLITE ON :: _r Press volume VOLUME +/- to increase or decrease the level. L.
There are two tuning methods: automatic and manual. Automatic tuning is effective when the radio signal is strong and there is no interference. If the radio signal is weak, tune into the FM station manually. You can also use the automatic and manual preset tuning features to store up to 40 stations in total (AI to E8:5 preset station groups with 8 preset station numbers each). _%,._ • This section exceptionallyuses the remote control for Europe,Australia, Asia, and Korea models.
4 Automatic tuning is effective when the radio station signals are strong and there is no interference. 1 Set the operation mode selector to TV/AV. Press ENTRY © (A/_z) once to begin automatic tuning. When this unit is tuned into an FM station, the TUNED indicator lights up and the frequency of the station appears in the front panel display. • Press/x to tune into a higher frequency. • Press _ to tune into a lower frequency. ENTRY¢' 2 Press FM to select FM as the input source.
I_trtIIIIilli[, 3 Press SEARCH repeatedly until the AUTO 2 indicator disappears from the front panel display. Press FM to select FM as the input source. "FM" appears in the front panel display. SEARCH _%'. 4, • You can also press INPUT on the front panel repeatedly to select FM as the input source. • If "XM" appears in the front panel display, press FM/XM again to display "FM" (U.S.A. and Canada models only). jFM "" LT ,:,,.-,,.
_dri|fWllllll ' .,,+,,. • if the colon C) does not appear, press PRESET/TUNE to display the colon. • U.S.A. and Canada models use CAT/A-E o. • Even when the operation mode selector is set to YSP, you can select the desired preset group by pressing A-E (CAT for U.S.A. and Canada models). You can also store up to 40 stations (AI to E8:5 preset station groups with 8 preset station numbers each) manually. 1 Set the operation mode selector to TV/AV.
_Jr/BdllillBf_ !!il !i ¸i!!i!:ii_iiiiii You can tune into the preset stations simply the preset station groups and numbers. 1 Set the operation mode selector by selecting to TV/AV. 4 Press ENTRY # (A/_) to select the desired preset station number (1 to 8). The preset station group and number appear in the front panel display together with the station band and frequency. ENTRY_ 2 Press FM to select FM as the input source. "FM" appears in the front panel display. i.:11:Ft'I 88. g HHz I _%,.
_'t_|fqlillP Tune into the desired Radio Data System broadcasting station. We recommend automatic preset tuning to tune into the Radio Data System broadcasting stations (see page 52). NEWS News AFFA TF'S Current affairs I NFO General information SF'OF:.T Sport EDUCATE Education I':'F.'.A HA Drama CULTURE Culture SCI ENCE Science I..IAF.'.TED Light entertainment POP M Pop music F.'.OCK t'l Rock N, 0, F:.
You can enjoy multi-channel surround sound by changing the beam mode using the beam mode buttons on the remote control. Select 5 Beam, Stereo plus 3 Beam, 3 Beam, or My Surround for multi-channel playback. Notes:_ • When ANGLE TO WALL OR CORNER is set in MANUAL SETUP (see page 78), 5 Beam and 3 Beam cannot be selected. • To enjoy 5 Beam, Stereo plus 3 Beam, or 3 Beam as the beam mode, you must perform AUTO SETUP or MANUAL SETUP so that the parameters best match your listening environment.
_|J Outputs normal sound from the front left and right channels and sound beams from the center and surround left and right channels. This mode is ideal for watching live recordings on a DVD. Vocals and instrumental sounds can be heard close to the center of the listening position while sound reflections from the venue itself can be heard on your right and left, giving you the feeling that you are sitting right in front of the stage. o[,_rllllo_'llllIKO]lll[eB.
L_I!I_I"I'IIIPJ!III'I"I'I'III' • Decoder Depending indicators on the input source and the selected mode, the indicators follows: in the front panel display surround PCM + _ Neo:S Neural Surround (U.S.A. and Canada models only) - All sources Movie Music Game Movies Music Games Cinema Music Movies Music - XM Satellite Radio (U.S.A.
_|][OJ_B.'_IIJIO]IIi[O_yO]III[d Press SUR. DECODE repeatedly (or press SUR. DECODE and then press <1/ D) to switch between surround modes. This unit can decode 2-channel sources for 5.1-channel Choices: Neo:6 Cinema, Neo:6 Music, PRO LOGIC, playback so that you can enjoy a variety of surround sound effects by switching the surround mode.
IW_. ,Ui'_m.y.--,ma, lppi,ld|. 4 You can enjoy analog audio signals output from your TV in real surround sound. If you hear sound from your TV speakers, reduce the volume level of your TV until you can no longer hear any audio being output. To reduce the TV volume level, use the remote control supplied with your TV. Before performingthe steps below,set the volume of this unit to 30. If necessary,adjust the volume levelin step 4 below. 5 Press VOLUME +/- to adjust the volume level.
_'[_Vlll_OtlK".,llllll[e]ltllfeil.'.leiiiitl When Dolby Pro Logic II Music selected is PANORAMA i Gives the front left and right channel sound a wraparound effect, distributed throughout the entire You can configure the parameters for Dolby Pro Logic II Music and DTS Neo:6 Music to fine-tune the surround sound effect. surround sound field to give you an expansive feeling.
You can enjoy 2-channel and 5-channel stereo playback as the beam modes by pressing STEREO on the remote control. Notes _ • When you play back Dolby Digital audio signals in the 2-channel or 5-channel stereo playback, the dynamic range becomes compressed. If the volume level decreases to the extreme, use other beam modes except My Beam.
You can improve listenability in a noisy environment by changing the beam mode to My Beam, which outputs sound beams directly toward the listening position in a single channel. In addition, My Beam is also ideal when you do not want the sound beams to be reflected on the walls in your listening room or when you do not want to disturb other people while enjoying music or movies at night. My Beam r- microphone (U.S.A.
You can adjust the beam angle manually while playing back an input source. This function is also ideal if the listening position is out of the operation guarantee range of the auto-adjust function. 1 Set the operation mode selector to YSP. 2 Press MY BEAM. "MY BEAM" is displayed in the front panel display. 3 Press <11 _ while "MY BEAM" is displayed to adjust the beam angle. Control range: L90 ° to R90 ° • Press <1repeatedly to increase the horizontal angle on the left side.
This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from stereo or multi-channel sources. This unit is also equipped with a Yamaha CINEMA DSP (digital sound field processing) chip containing several sound field programs used to enhance your playback experience. Most of the CINEMA DSP programs are precise digital recreations of actual acoustic environments found in famous concert halls, music venues, and movie theaters. _%'..
• Sound field program descriptions You can select from the following sound field programs based on your listening preference when you play music, movie or sports sources. For details on how to switch between the available sound field programs, see page 67. There is only one sports sound field program available. Music Video This program produces a vibrant environment and lets you feel as if you are at an actual jazz or rock concert.
o_..llll, l..[,m,_,irr_r,l,lt,1,1r.l,,_ You can select from three different CINEMA DSP programs (MUSIC, MOVIE, and SPORTS) depending on the type of source you want to enjoy. The CINEMA DSP indicator lights up in the front panel display when one of the CINEMA DSP programs is selected. • The CINEMA DSP programs are ineffective when My Surround (see page 57) is selected as the beam mode.
• Movie programs • Select thisCINEMA DSP programwhen you play back movie sources, especially the onesencoded in Dolby Digital, DTS, or Dolby Surround. This program clearly reproduces dialog and sound effects, thus creating a broad and expansive cinematic space amid silence. 1 Set the operation mode selector to YSP. 2 Press MOVIE to select the movie CINEMA Sports program Select this CINEMA DSP program when you play back sports sources.
l_"l{l_,l[,.",Iol#l#teBll_rgllOl£oIJl#t,h_tl., • Turning off CINEMA DSP programs Turn off the CINEMA DSP programs if you want to enjoy the original sound without the CINEMA DSP program effect. 2 Press MUSIC, MOVIE, or SPORTS to select the desired CINEMA DSP program. MUSIC 1 Set the operation mode selector to YSP. MOVIE _or _or SPORTS _ Press A / _. "DSP LEVEL" is displayed in the front panel display. 2 ENTRY¢ Press OFF to turn off the CINEMA DSP programs.
You can use the Music Enhancer of this unit to improve the sound nearest to the original artifacts such as the MP3 format. 3 depth and width of compression Press ENHANCER repeatedly to switch between the Music Enhancer levels (OFF, MIN, and MAX). ENHANCER $ (U.S.A. and Canada models) Set the operation mode selector to YSP. mHHAH,. :HI mR mHHm'-:m'..I:LOL; Et4HANCER OFF The ENHANCER indicator lights up when "ENHANCER:HIGH" or "ENHANCER:LOW" selected. 2 Press ENHANCER to select the Music Enhancer.
The night listening enhancers are designed to improve listenability at lower volumes or at night. In addition, you can limit the volume level of the TV so that it will not vary suddenly to a great extent whenever the contents being broadcast change (i.e. due to commercials, etc.). The EQUAL indicator lights up in the front panel display when "TV EQUAL VOLUME" is selected.
Use this feature to automatically set this unit to the standby mode after a specified period of time. The sleep timer is useful if you are going to sleep after a certain amount of time while this unit is still playing back a source. Each time you press SLEEP, the front panel display changes as shown below. SLEEP ...+5L EEP 120p',in (U.S.A. and Canada models) SLEEP 9Or,_i n SLEEP 6&,', ir, SLEEP 3&o', ir, --SLEEP OFF Set the operation mode selector to YSP.
f_'l[Ipmtm[:_[:t_;QJo.r_! Canceling 1 the sleep timer Set the operation mode selector to YSP. Press SLEEP repeatedly until "SLEEP OFF" appears in the front panel display. SLEEP '-LEEP 3 OFF ,i Wait for a few seconds without operating this unit to confirm the setting for the sleep timer. The SLEEP indicator disappears from the front panel display, indicating that the sleep timer is deactivated.
You can display the format and sampling frequency of the current input signal in the front panel display. 2 Press DISPLAY. The information on the current input signal is displayed as follows: DISPLAY Q ! Lights up \ I / -_oarr/u. U.S.A. and Canada models) 1 - voL or Set the operation mode selector to YSP. DI.,ID AUTO: DOLBV DGTL ' Input signal Dolby digital ..... Indicator .... ' DOLBY DGTL DTS DTS PCM PCM Analog 32/44.1/48/64/ 88.2/96 kHz ANALOG When the input signal is unclear, .
You can operate the following functions using the remote control supplied with your TV if this unit and an HDMI control-compatible TV (except some models) are connected via HDMI. • Turning on or off the power (synchronized operation with the TV) • Selecting the audio output component (TV or this unit) • Adjusting the volume level (up/down and mute) An example of the HDMI control-compatible component is a Panasonic EZ Sync (for U.S.A.
To achieve the best quality surround sound, you can use MANUAL SETUP to fine-tune the listening environment parameters, as well as to make advanced settings for sound signals, sound beams, digital input, and the OSD. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your own listening environment. ..,+,.. • You can save the settings optimized specific conditions of your listening environment (see page 45).
'_ h,I q.,I II.'1 .til q ' 3 Press A / "_ to select MANUAL SETUP and press ENTER. Use the remote control to access and adjust each parameter. The following screen appears on your TV. "", ',, "'i> I! ! 'I'IHIiUHI. :,r__ii.,i ÷ (U.S.A. and Canada [._], [,€] : UP.,[:,,.xJn [ ENTER ] : Enter _.,+,._ You can adjust reproducing 1 2 I)SOUND MENU 2 )BERi"IMENU 3) INPUT bIENU 4)DISPLAY MENU models) the SET MENU parameters while the unit is sound. Set the operation mode selector to YSP.
I,_r-.w,urmwqFT_111" ANGLETO WALL OR CORNER FLAT TO WALL Use to manually adjust the various parameters related to the sound beam output. SET MENU _ MANUAL SETUP _ BEAM MENU , ,',, L_LI'i/ t'ILNIJ ÷ A)SETTING PRRRI'IETERS B)BERH RC,JIJSTMENT C) IMAGE LOCATION [ak] / IT] : IJP/[:,ot,,in [ENTER] : Enter Select FLAT TO WALL if this unit is installed in parallel with the wall in your listening room.
it/&,li,|l_ yil..l!iltlj -- Select ANGLE TO WALL OR CORNER if this unit is installed in the comer of your listening room. Adjust the width and length of your listening room as well as the distance of the listening position from this unit. Listening position from the unit Room width (Installed height of this unit) Use to adjust the installed height of this unit. Choices: 0.0 m to 3.0 m Initial setting: 1.0 m _._ Room Choices for 2.0 m to Choices for 1.
HORIZONTAL ANGLE (Horizontal angle) BEAM TRAVEL LENGTH (Beam travel length) Use to adjust the horizontal angle of sound beams for each channel. By adjusting the horizontal angle of the sound beams, you can optimize the sound beam paths. A test tone is automatically output. A certain amount of delay must be applied to the sound from each channel so that all sounds can arrive at the listening position at the same time.
,_Mi'l I_ fqf_'/-'llffl" FOCAL LENGTH (Focal length) Use to set the distance from the front of this unit to the focal point of output for each channel to achieve an expansive feeling for each channel. The focal points except for the center channel should be set near the reflection points on the walls. The shorter the distance, the larger the expansion. Front left channel Center channel TREBLE GAIN (Treble gain) Use to adjust the high-frequency output level of each channel.
li_Mi,|lM,IF._dll' • IMAGE LOCATION (Image location) Use to adjust the direction from which the front left and right channel sound is heard so that each sound can be heard closer to the center channel. Use this feature to redirect audio signals if the sound coming from the front left and right channels seems unnatural, such as when your listening position is not the center of your listening room. You can only adjust this parameter when 3 Beam or 5 Beam is selected as the beam mode (see page 56).
_M#l#Mq_'/=lllll' BASS OUT (Bass out) Low-frequency (bass) signals can be directed to the subwoofer and/or the front left and right channels. This setting also determines the routing of LFE (low-frequency effect) signals found in Dolby Digital or DTS sources. Choices: SWFR (Subwoofer), FRONT • Select SWFR if you connect a subwoofer. LFE and low-frequency signals from other channels are directed to the subwoofer. • Select FRONT if you do not use a subwoofer.
nvm v_,v,u._, vJl.'/_ll /• • DD/DTS Dynamic Range (Dynamic range of Dolby Digital and DTS signals) Use to select the amount of dynamic range compression. This setting is effective only when the unit is decoding Dolby Digital and DTS signals. Dynamic range is the difference between the smallest sound that can be heard above the noise of the equipment and the biggest sound that can be heard without distortion.
rlr,_fi, llf__i4l_'.lUi#ll i. ?l;,"; r:l {T ?i¢1"?"Lhk_FHT H,,'i'tru H'Cii3i Ct HDM I ÷ HDMII .... RUXI ( RUX 1 HDMI2 .... DUD ( DUD i ,;,.'l • INPUT Till (input trim) Use to adjust the input level of the input source. ? i";,Ti,lnliT "" "" i ,,.'l t-,"lill'.il iKii'i ) [i]i'['F]:UpiDol,Jn [-_I]/[I_] :Sel [ENTER ] :Retur.n ÷ Tt.J..."STB [:'l..iD [i'].!['_F] RNRLI]G .... DIG I TRL.. DIGITRL.. : I_lp/[)ObJh i" '; 3, OdB -3. OdB -3. edB ['ll].,"[tl'] : Sel [ENTER] :Retur.
w_v,_v,,n..v_l=li q, • INPUT RENAME (Input rename) Use to change the name of the input source in the OSD and the front panel display. Press an input selector button (e.g., DVD) to select the component you want to change the name for and perform the following procedure. L,';'i'iF. i r,,L, nmlt. • HDMI SET (HDMI settings) Use to change the HDMI audio/video output/input match the connected component.
i_/'., y_vL #,r., fl_'] R dII- VIDEO INFO (Video information) Use to display the video information of the current input signal. Choices: HDMI SIGNAL, HDMI RES., HDMI ERROR L,,,,,r,r',', iFn I,,',,,'i;,q"ij ii, ,. ÷ HE:,HI SIGHAL, • ,HE:,MI HDMI RES.,..,1080P HDr'IIERROR .......
,-, ,,-,r,,fln'i_TDrl/ 7,"ilt.qll .'.' lilV.L ',11 ,k OFF Use to manually adjust the various parameters related to the display. SET MENU ---)MANUAL SETUP ---)DISPLAY MENU I_-ON [_I]/ [I_]:Select [ENTER] :Return MENU ÷ A::,F.DISPLAY E:::'OSD SET C ::,IJHI T SET • Select ON to enable the HDMI control. The signals input at the HDMI IN jacks are output at the HDMI OUT jack when this unit is in the standby mode. • Select OFF to disable the HDMI control.
f_MLla,_fl&..l_illi-- • OSD SET (OSD settings) Use to adjust the display position and to set the display time of the OSD. + OSD NSD h,' II I'_,r _f_'P kl,_q.l.lL,' ._t.. '-,WI I SHIFT .......... 0 [:,I SPLR"," T IME. ••NN [Jk]..."[_] :IJP/Dokln [_I]i[_-]:Sel [ENTER] :Ret,ur.n OSD SHIFT (OSD shift) Use to adjust the vertical position of the OSD. Adjust toward the - (minus) direction to raise the position of the OSD, and adjust toward the + (plus) direction to lower it.
You can adjust the sound beam output level of each channel by using the test tone or the audio output being played back in each beam mode to achieve a more true-to-life surround sound experience. 3 You can use the test tone feature to output a test tone from each channel to manually balance the channel levels. Use this to set the channel levels so that the volume level Press A / _ to adjust.
n_nl_ilslolcmI_m:.;It_i_*l_P.;t:.t#r_ 5 Press TEST when you have completed all Set the operation mode selector to YSP. your adjustments. TEST 2 Press CH LEVEL repeatedly (or press CH LEVEL and _ / _) you want to adjust. No_iiii! • All channel levels cannot be adjusted when the 2-channel or 5-channel stereo playback (see page 62), My Beam (see page 63), or My Surround (see page 57) is selected as the beam mode.
W-'l'gnT[_lmtollilt,_¢lltoKolle"!_lmt_" 3 Press <] / _>to adjust the channel volume. Control range: - 10.0 dB to + 10.0 dB 4 Wait for a few seconds without operating this unit when you have completed your adjustment. • All channel levels cannot be adjusted when the 2-channel or 5-channel stereo playback (see page 62), or My Surround (see page 57) is selected as the beam mode. • "FRONT L/R" cannot be adjusted when Stereo plus 3 Beam is selected as the beam mode (see page 57).
You can select the type of audio input signals of the selected input source according to your preference or the conditions of the input source. This function is available for TV/STB, DVD, AUXI, and AUX2. _.,+,,_ We recommend setting the input mode to AUTO in most cases. 3 Press INPUTMODE repeatedly totoggle between input modes. INPUTMODE rD_D L #LITO 'D _ TU..."STB _IUTO E:,T5 TU..."STB [.
This unit has additional menus that are displayed in the front panel display. These menus offer additional operations to adjust and customize the way this unit operates. When "F.PANEL KEY" is set to "F.PANEL: OFF" (see page 100), STANDBY/ON on the front panel is ineffective. Use STANDBY/ON on the remote control instead to adjust the system parameters. _ _ra_te_ 2 Follow the procedure below to enter the system parameters.
4 Press <_/ _ to switch between "PROTECT: ON" and "PROTECT: OFF". You can protect the settings you saved in the system memory of this unit from being accidentally erased or unwantedly changed. 1 Repeat steps 1 to 3 in *'Using the system parameters" on page 94. 2 Set the operation mode selector to YSP, € I 3 PRO TEL'.'T : 0_'4 $ Confirm that"MEMORY PROTECT" is displayed in the front panel display and press ENTER. I I/_.w/_R ',"'-",'rt '.,.
5 You can set the maximum volume level so that this unit Press <] / D to adjust the maximum volume level. will not output sound beyond the limited volume level. 1 Repeat steps 1 to 3 in "Using the system parameters" on page 94. 2 Set the operation mode selector to YSP. Control range: MAX, 99 to 01, MIN Control step: 1 Press STANDBY/ON on the remote control to set this unit to the standby mode. 3 Press z_ / _ so that "MAX VOLUME SET" is STANDBY/ON displayed in the front panel display.
i_;ITr_ila, 3 Press A / _ lhr==..l¥.-mr_.:,_t_l.t:_l=_,_ so that "TURN ON VOLUME" is displayed in the front panel display. Use this feature to activate or deactivate the monitor check function of this unit. When this parameter is set to "YES", this unit receives the information on the available video signal resolutions from the video monitor connected via HDMI (see page 22).
4 Press <_/ D to switch between "MON CHK: YES" and "MON CHK: SKIP". ! You can test the sound beam output from this unit to experience the sound beam. 1 2 t,lrIH r:Hk'.': YES Repeat steps I to 3 in "Using the system parameters" on page 94. Set the operation mode selector to YSP. 2: Press _ / _ t r'10NCHK: • Select check ° Select check 5 __ 3 so that "DEMO MODE" is displayed in the front panel display. Sk'.' IP MON CHK: YES to activate the monitor function.
_T;l_::,:,nr,r_..l,J._€:;.u,_l_u,rm:ig_ 4 Press <_/ _ to switch between "DEMO: ON" and "DEMO: OFF". You can disable the INPUT on the front panel when you adjust the system parameters. Repeat steps 1 to 3 in "Using parameters" on page 94. 2 $ [.',Er'l0 : 0N 0 FF • Select DEMO: • Select DEMO: 5 Set the operation mode selector to YSP. J 3 DEHO: the system Press _ / _ so that "PANEL INPUT KEY" is displayed in the front panel display. J ON to activate the demo mode.
4 Press <1/ _>to switch between "P.INPUT: ON" and "P.INPUT: OFF". You can disable the front panel keys except when you adjust the system parameters. Repeat steps I to 3 in "Using the system parameters" on page 94. 2 $ P, iNPUT: ON Set the operation mode selector to YSP. =: Press _ / _ t _' iNPlIT: I = 3 displayed in the front panel display. OFF Select EINPUT: ON to enable the INPUT key on the front panel. Select P.INPUT: OFF to disable the INPUT key on the front panel.
4 Press <_/ _>to switch between "F.PANEL: ON" and "F.PANEL: OFF". You can reset all of the parameters of this unit to the factory presets. This procedure completely resets ALL the parameters in SET MENU. After performing the following procedure you must run AUTO SETUP again to match your surround sound environment. € 1 Repeat steps 1 to 3 in "Using parameters" on page 94. 2 Set the operation mode selector to YSP. 3 Press z_ / _ VOL c |"z_NNFL: | fl ON g -.1 the system t wJ.
II-'l";nl_Ii, l,• _,l_--J,_.-_ _.l,F 5 11_ ii ipi t_/t- Press <_/ [_ to switch between "PRESET: RESET" and "PRESET: CANCEL". ENTE $ vo_ P_'c'-=T: RFSET !", _ t L. __ :: t PRESET: L'.'_ N C EL • Select PRESET: RESET to reset all of the current settings. • Select PRESET: CANCEL to cancel the resetting procedure. 6 Press STANDBWON on the remote control to set this unit to the standby mode. STANDBY/ON The new setting will be activated when you turn on the power of this unit next time.
In addition to controlling this unit, the remote control can also operate other AV components made by Yamaha and other manufacturers. To control other components, you must set up the remote control with the appropriate remote control codes and set the operation mode selector to TV/AV to change the control area. Depending on the external AV component you are using, you may not be able to operate the component with the remote control, even if a remote control code is set.
• Operating yourTV Q Set the operation mode selector to TV/AV, and press TV to select TV as the input source. The control area of the remote control changes to the TV operation mode. Numeric buttons Selects a TV channel for playback. (_) CH+/Switches between the available TV channels. (_ TV INPUT Switches the input source for your TV. TV POWER Turns on or off the power of your TV. TV INPUT1 Selects the input source of your TV. TV VOL +/- ® Adjusts the audio output level of your TV.
• Operating your DVD player/recorder Set the operation mode selector to TV/AV and • Operating your STB (CATV/Satellite tuner) press DVD to select DVD as the input source. Set the operation mode selector to TV/AV and The control area of the remote control changes to the DVD operation mode. press STB to select STB as the input source. The control area of the remote control changes to the STB operation mode. ® ! ® t ® (U.S.A. and Canada models) (U.S.A.
[] Operating your VCR Set the operation mode selector to TV/AV and press AUX1 to select VCR as the input source, The control area of the remote control changes to the AUX1 operation mode. This operation is available when your VCR is connected to the AUX 1 AUDIO INjacks on this unit. t ® (U.S.A. and Canada models) Numeric buttons Enter numeric digits. CH+/Switches between the available VCR channels. (_ Operation buttons for VCR Operate your VCR, such as play and stop.
Setting macros for the TV with the tuning capability The TV macro feature makes it possible to perform a series of operations with the press of a single button. For example, when you want to play a DVD, you would normally turn on the component, select DVD as the input source, and press the play button to start playback. The TV macro feature lets you perform all of these operations simply by pressing the DVD macro button.
_ ; [ ;] l l l l ) ( :-][l'Zl] • l | (_*e] Setting J_ J':_ ( l l g:]_ macros for the TV without the • Operating macros tuning capability Press and hold CODE SET and press one of the input selector buttons to select the input source you want to set macros for. Proceed to step 2 while holding down CODE SET. Whileholding down, press Press and hold one of the input selector buttons for approximately two seconds to select the input source you want to operate macros for.
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the AC power supply cable, and contact the nearest authorized Yamaha dealer or service center. • General See Problem Cause Remedy page This unit fails to turn on when STANDBY/ON is pressed, or enters the standby mode soon after the power has been turned on.
_lliOllll_]r_l[OZlltlll_ Problem Cause No sound from the subwoofer. BASS OUT in SUBWOOFER FRONT. Remedy SET is set to Select SWFR. See page 83 The source does not contain low bass signals. Distorted sound. or too little bass CROSS OVER in SUBWOOFER SET is set Set CROSS OVER correctly. incorrectly. One of the night listening enhancers currently selected. Too much bass sound. is Turn off the night listening enhancers. 82 71 TruBass is currently turned on. Turn off TruBass.
jpi.,'7_l_,x.:.., • Remote control See Problem The remote control does not work and/or function Cause Remedy page The remote control functions within a Wrong distance or angle. 32 maximum range of 6 m (20 ft) and no more than 45 degrees off-axis from the front properly. panel. Cannot operate external components with the remote control of this unit. Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control _nsor of this unit.
• FM tuner Problem FM stereo reception Cause is noisy. The characteristics See page Remedy of FM stereo broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor. 30 Check the antenna connections. Try using a high-quality antenna. directional FM Use the manual tuning method. 51 There is distortion, and clear reception cannot be obtained even with a good FM antenna. There is multi-path interference.
• Dolby Digital Dolby Digital is a digital surround sound system that gives you completely independent multi-channel audio. With 3 front channels (left, center, and right) and 2 surround stereo channels, Dolby Digital provides 5 full-range audio channels. With an additional channel especially for bass effects, called LFE (low-frequency effect), the system has a total of 5.1-channels (LFE is counted as 0.1-channel).
Kt_[*l.'_"_ • 14' LFE 0.1-channel This channel is for the reproductionof low basssignals. The frequency rangefor this channel is 20 Hz to 120 Hz. This channel is counted as 0.1 because it only enforces a low-frequency range compared to the full-range reproduction by the other 5/6 channels in Dolby Digital or DTS 5.1/6. l-channel systems.
• Numerics 3 Beam ............................................................................ 5 Beam ............................................................................ • A AC power supply cable ................................................... Audio pin cable ............................................................... AUTO SETUP (IntelliBeam) .......................................... • 31 21 37 Beam mode ..........................................................
AMP SECTION FM SECTION • Maximum Output Power (JEITA) ................................................. 2W(I kHz, 10% THD, 4 _) × 40 20 W (100 Hz, 10% THD, 4 f_) × 2 • Tuning Range SPEAKER SECTION GENERAL • Driver • Power Supply [U.S.A. and Canada Small dia. speakers ...................... Woofers 4 cm (1-9/16 in) cone magnetic shielding type x 40 ...................... I 1 cm (4-5/16 in) cone magnetic shielding type × 2 • Frequency [Australia model] models] response .........................
List of remote control codes PROSCAN PROTON TV 231,241,251 297,250, 260. 270 VCR ADMIRAL AIWA 292, 293, 216 294, 276, 283, 284 QUASAR 234, 235 RADIO SHACK299, 293, 297 ADMIRAL 395 AIWA 396, 397, 398, 329 AKAI ALBA 295.296 296 RCA 293. 297, 234. 256. 257, 258. 221 AKAI AUDIO AOC BELL & HOWELL BESTAR 297 292 298 RUNCO SABA SAMPO SAMSUNG 220, 230, 271 223.269, 265,266 281,297,280 297,239, 248, BLAUPUNKT BLUE SKY 229, 222 298 SANYO 262, 275 295,233.
RCA 744, 792, 793 SCIENTIFIC ATLANTA 752, 753,754, 789 SONY 756, 757 TOCOM 755 UNIVERSAL 769, 772, 773, 774, 775 V1EWSTAR 764, 766, 776, 777, 778,779, 782 SATELLITE TUNER ECHOSTAR GE GENERAL 822 837,838,839 INSTRUMENT HITACHI 823 824 HUGHES JVC 843, 844, 845, 846 822 MAG NAVOX 825 PANASONIC PHILLIPS 826, 829 825,843,844, PRIMESTAR PROSCAN RADIO SHACK 845,846, 847, 848, 849 827 837,838,839, 842 828 RCA SAMSUNG SKY+ SKY HD SONY TOSHIBA UNIDEN ZENITH ii 837,838,839,842 852 853 853 832,835 833,836
OYAMAHA © 2007 YAMAHA COP.POP, ATION All rights reserved. YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF, YAMAHA YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b,H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, YAMAHA YAMAHA YAMAHA ELECTRONIQUE ELECTRONICS SCANDINAVIA YAMAHA MUSIC 90620, U.S.A. GERMANY FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEXO2, (UK) LTD.
OYAMAHA YSP-4000 Digital Sound Proj'ectorrM Reference Guide for iPod M/XM Radio This is the Reference Guide for Yamaha YSP-4000 Digital Sound Projector. This guide explains the connections and operations of iPod and XM Satellite Radio (U.S.A. and Canada models only). Operations in this guide use keys on the supplied remote control unless otherwise specified. For general information including the controls and functions of this unit, refer to the owner's manual. _.,+,.
This unit has the DOCK terminal on the rear panel that allows you to connect the Yamaha iPod universal dock (such as YDS-10, sold separately). Station your iPod in the Yamaha iPod universal dock, and use the supplied remote control to operate your iPod. • Only iPod (Click and Wheel), iPod nano, and iPod mini are supported. • Some features may not be compatible depending on the model or the software version of your iPod.
• For a complete list of status messages that appear in the front panel display and in the OSD, see the "iPod" section in "Troubleshooting" on page 11. • While your iPod is stationed in the Yamaha iPod universal dock connected to the DOCK terminal of this unit, your iPod battery is automatically charged as long as this unit is turned on.
• b,-_,-,lii_lll' 4 [ Press A / _ and (1 / _>to navigate through the iPod menu, and press ENTER to start playback of the selected song. and ,, • Press RETURN or MENU to go back to the previous menu. • The information on the current song also appears in the front panel display. Youcan set the front panel display mode: CONT. or ONCE. For details, see "SCROLL" (Front panel display scroll) in "EDISPLAY SET" (Front panel display settings) in the owner's manual (see page 88).
[] About XM Satellite Radio XM Satellite Radio offers an extraordinary variety of commercial-free music, plus the best in sports, news, talk, and entertainment. XM is broadcast in superior digital audio from coast to coast. From rock to reggae, from classical to hip hop, XM has something for every music fan.
_qhr:_`_j..`_ir_i.:_P_[[_]_Ila#Èjt_s_lf_`._w`-mr:imr_.1_t_r_1_[_J_ AiC __'_?i_i Once you inserted XM !_iii?i??i!ii_ ? _? !_ !?iil iiiliiiiii! !!i¸i_¸_¸¸¸ii¸¸ ¸!?_i_iim_!!ii ! ¸¸¸ i _ _ii!iii!i!i ¸i_iiiiiiii _%iii? _i__!iiiiii_i?i I_i!i !i_! ill I!il iiiilili!i iiili!!!!!ii!ii_!!ii!!!i i!i iliill !iiiliii have installed XM XM Mini-Tuner, READY antenna, home audio you are ready XM programming. eight-character Mini-Tuner Channel system, Search and begin places Channel on page 7).
3 Search for a desired the four XM Satellite • To select a channel channel by using one of Radio search modes: from all channels, • Category 1 Press SEARCH SEARCH". see "All Channel Search mode" on this page. • To select a channel by channel category, Search mode repeatedly to select "CAT SEARCH see "Category Search mode" on this page. • To select a channel from the preset channels, see "Preset Search mode" on page 8.
D:lA_u_]lfll'_Jtwmt!lJllmt, • Preset lJllJ.N1P'-w_.litJl_:.ln_.to_llmtoIo[:_.lo]lll_ Search mode Prior to selecting a preset channel in the Preset Search mode, you must preset the XM channels. For details, see "Presetting the XM TM Satellite Radio channels" on page 9. 1 • Direct 1 Press SEARCH repeatedly to select either "ALL CH SEARCH" or "CAT SEARCH". Number Access Press SEARCH repeatedly to select "PRESET SEARCH". mode SEARCH SEARCH !' _LL CH '-"="=' _,,.._,.,I.':H or • ,.._.
_f_y'_`-"_"-_-__n_I_|_J'_v_-1_I_oI_o_O_k`Io_ 4 You can use this feature to store up to 40 XM Satellite Radio channels (AI to E8:5 preset channel groups with 8 preset channel numbers each). You can then recall the preset channels easily by selecting the preset group and number as described in "Preset Search mode" on page 8. Press ENTRY; (,_ / _) repeatedly to select a preset number while the MEMORY indicator is flashing. The selected preset number appears in the front panel display.
You can display the XM Satellite Radio information (channel number/channel name, channel category, and artist name/song or program title) for the currently selected channel in the front panel display or in the OSD. • You can set the front panel display mode: CONT. or ONCE. When ONCE is selected, the front panel display scrolls characters to the end once, after which the first 15 characters appear and stay. See "SCROLL" (Front panel display scroll) in "F.
Refer to the following charts when the status messages appear during your iPod or XM Satellite Radio operations on this unit. If you experience a problem that is not listed below, or if the instruction below does not help, set this unit to the standby mode, disconnect the power supply cable, and contact the nearest authorized Yamaha dealer or service center.
OYAMAHA © 2007 YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, YAMAHA YAMAHA ELECTRONIK ELECTRONIQUE YAMAHA YAMAHA ELECTRONICS SCANDINAVIA YAMAHA MUSIC EUROPA G,m,b.H. SIEMENSSTR. FRANCE S.A. RUE AMBROISE AVE., BUENA PARK, CALIF. ONTARIO M1S 3R1, CANADA 22-34, 25462 RELLINGEN BEI HAMBURG, CROIZAT BP70 CROISSY-BEAUBOURG 90620, GERMANY 77312 MARNE-LA-VALLEE (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 A,B.
ptay For detailed operation refer to as.:lurnitureobstruc[ing u.may tnstaif this measured unit m the exact from center lhe left and rigilt of the wall when instalI'this it is the purl7 o_so unit in parallel Insiafl corners, witi th_s und in the corner adjacen[ at a 40" to 50': angfe from the wails l;_5"?8_-#,An cb:ecL _uci as furniture 4£ [o 5_ •l_, Cente[ P --_ SurrotKld [e_t ct_a¢'_rlet SL_rrou_]Li rfgl)l oiler, -# rio! _" F[o,q[ [,:hannol rJQr_I crla_qReJ SurfouP.
a TV o DVD player to this un_ [h_n onnecT!on ;:ennec!_c examp}e oetween ,s_ow8 a way _o sonnec[ _ur DVD exlema[ corT o._Or_enTssuc_ a>_a V r}V[} xaye_ rn :}la er aria [h_s DVD @aver A C8_ CaO_ N e lo TET_ _,xarx t, _N( _ stme [o the AC wail otto@ Connect cables ._. t_e toIIow_nq o@er. _ l-i_[_ _ ._,o_s_ s- s,_rJ........[.
.... _ ca_xs:_ I V tuner _n% 4©Mt cabtes' :K 6 y _al a_rwave on page 22 _s_et s me va Owners DVD player _:n6 qDM c _o_e b-o_ 1etaHs see _©onnect}one _wanu_ u,_,,__,t¢_,,G,ucab_ ,, necessary I your _V _as o_wb s£:s make an audio connect_oq between ¢ou_ TV ard this unit Fo_ delhi s, see "Conn_ "*_.... :>OO tepala_ely YSP-4000 e _c AN [H_HA ]@/POIF A[ WSY8 AUDH) _L _I0 3©['IAeCt C_i[_te£ iq th@ %UX 1 IN ==-- .o Subwoote 1-o% COl%n@O{ION IOiH)WH Q ©ro_ ...............
supplied InteHiBeam microphone to the INTELLIBEAM M_C _ac_. on the front pane_ _'_ e_J o _£_ _ uu_ _ _-41rdboa_'d mct_o 5_tor}e slang _or the At/TO SL Assemble th_ R._R _ar_a ar_s ace the Inte/_Bear_ f e _ntell[Beam m_crophone a_ your normal listening position n Press STANDBY/ON on the Turn on the power ot your rv inpu_ on your TV _t t 0[3 )_D [[ v_q@o 11@, }._ :} -_fi©W[1 I}pu[ ;r G;:_Ol@ S Ill C'i)nR_Cl ! co[]Bec_@_ } [ w'_ #s._ • @ Vl@@O ol@.
Set the ooera:_on :::ode se_ec:( Press to YSR SETUP ENTE R _o s:a t _roceau e, and then eave th_ room within ] U seconas q se;uttas Press ana _lold AUTO SETUP for "_ ,_ more than 2 seconas :_ :'AJH b, }C@g_{ Ul!OW_fl ........... Jilt. C[_}{_D OO{2S .... ca i;ee OO1 ;the cr_._w_u ,_._m,_ _,lJI(i) SCT',JP ........ J SC@( (IHS 4ys_wsrs :} " ...... /6 ,O__f{IL "'"t_CK {[l_JLI;.") VI_I_}: _ _r_ _xs._m sic on the tront k£
Se ect the DVD wdeo me, ,T,_- Select the TV c, anne_ JStnCme remo[e control s pp_teo wit_ I_eratlon node Set the o.)eration sele(_or moae se_ec_.o_ :o YS R Ths Press D.TD on the remo_e unt swtches ru _J > S_L_mm_ u_. Press TV nn _r_e remo_e con m son_rro_ ot this unit }H SVVI/C[/_}$ Check 10 l.
OYAMAHA Registering Your New Yamaha Product is Fast and Easy Thank you for purchasing a new product from Yamaha Electronics.We'd like to continue providing you with high quality products and better service. So, we've made it simple to register your new product purchase online. Please take a few minutes to visit our website at www.yamaha.com/YEClregistration/and complete the information and questions included there.We appreciate your business and we look forward to hearing from you.
YAMAHA Home Audio products are designed and manufactured to provide a high level of trouble-free performance. YAMAHA Electronics Corporation, USA, is proud of the experienced craftsmanship that goes into each and every YAMAHA Home Audio product. YAMAHA sells its Home Audio products only through a network of high quality, specially authorized dealers and is pleased to offer the following Limited Warranty, which applies only to products purchased from our authorized dealers.