Instruction manual
ENGLISH
ENGLISH
39
NOTE:
• If registration was not successful, „ “ appears in the
display of the car radio.
• Depending on the mobile telephone manufacturer, it
is necessary to carry out the registration (PAIRING)
again in order to register your mobile telephone in the
car radio.
• Bluetooth compatibility cannot be guaranteed for
mobile telephones that come onto the market in the
future.
• In order to guarantee an optimum connection, please
ensure that the battery of your mobile telephone is
fully charged.
• Some makes of mobile telephone have an energy-sa-
ving mode. Please deactivate the energy-saving mode,
as you may otherwise have problems when telephoning
via Bluetooth.
• In order to be able to conduct an incoming or outgoing
telephone call Bluetooth has to remain activated in
your mobile telephone. Please consult the operating
instructions for your mobile telephone.
• Please ensure that you speak in the direction of the
built-in microphone. The connection of an external
microphone is not possible.
Outgoing Calls
1. Keep the PAIR/
button (20/24) held down to call up
the Bluetooth menu.
2. In order to enter the desired telephone number please use
either the touch screen or the number buttons on the remote
control.
NOTE:
If you have entered one or more fi gures incorrectly you
can delete them by repeatedly holding down the „ “
button or the „
왗
“ cursor button on the remote control.
3. To call up the desired number, press the „
“ button in the
touch screen menu. The words „DIALING OUT“ appear in
the display together with the telephone number.
4. To terminate the call please press the BAND/ button
(1).
NOTE:
•
In order to call the telephone number you have entered
you can also press the PAIR/ button (20).
• In order to end a call you can also press the „ “
button on the touch screen or the REDIAL/ button
(25) on the remote control.
Redialling
The device stores the last number you have dialled. In order to
dial this number again you can either keep the BAND/
button (1) on the device pressed down or the REDIAL/
button (25) on the remote control.
NOTE:
If you would like to redial the last number you can also press
the „ “ button on the touch screen.
To end the call press either the „
“ button on the touch
screen, the REDIAL/ button (25) on the remote control or the
BAND/ button (1) on the device.
Incoming Calls
In the case of incoming calls a ringing tone is heard from
the loudspeakers, and if the caller has a CLIP „Calling Line
Identifi cation Presentation“-capable telephone, the caller’s
number appears in the display of the car radio. Otherwise „CALL
INCOMING“ appears in the display.
1. To accept an incoming call, press the PAIR/
button
(20) to confi rm. You will now hear the caller through the
loudspeakers of your car.
2. To terminate the call please press the BAND/
button
(1).
NOTE:
• You can transfer the call back to your mobile tele-
phone. In order to do so, keep the PAIR/ button
(20) pressed. If this button is held down again, the call
is transferred back to the car radio.
• In order to reject an incoming call press the BAND/
button (1).
About the DVD-Player
With this DVD-Player you can play a vast variety of DVD-formats
➯
„Technical data“.
However, you must be aware that in many cases DVDs are
encrypted with a so-called “Regional Code”. This specifi es for
which region in the world the DVD is intended. As an example,
the DVDs marked with regional code “1” are intended for the USA
and Canada. DVDs with regional code “2” are for use in Europe.
NOTE:
With your DVD-Player you can only play DVDs with regional
code “2”. There are both lots of burning and compressing
methods as well as high quality differences in (burned) CDs/
DVDs. Moreover, the music industry has not yet agreed on a
fi xed standard for copy protection. This may, in very isolated
cases, result in problems when relaying CDs, DVDs and MP3
CDs. This is no malfunction of the player.
Furthermore, there may be isolated problems when playing CDs
or DVDs which were created on a PC (e.g. holiday photo-
graphs). In case of problems check the settings of the DVD
writing program on your computer. You should in particular make
sure that the DVD has been fi nalized. For further information on
this matter please refer to the operating manual of your recorder.
Input Not Possible
If a function or input selected by you is not
possible, the adjacent symbol is shown on the
screen.
05-AR 773 DVD_GB.indd Abs1:3905-AR 773 DVD_GB.indd Abs1:39 19.10.2007 14:14:47 Uhr19.10.2007 14:14:47 Uhr