Operation Manual

DATE SET
Once in Date Set mode, User can use the Encoder Vol Knob to adjust the Date / Month / Year. Short press the AUDIO
button to confirm the entry and move to the next entry.
CLOCK
The time of the clock is set to 12:00 by default. User can adjust the time by rotate the Encoder Vol knob clockwise to
adjust the minute and rotate the Encoder Vol knob anticlockwise
to adjust the hour.
If the unit is equipped with the OPTIONAL RDS Function, the clock will be automatically updated by the RDS
roadcasting, provided if the RDS broadcast does include the clock information ( RDS CT FUNCTION )
TIME FORM
"12H" is the default setting. User can use the Encoder Vol Knob to choose the Time Format between “12 Hours” & “24
Hours”
AV JACK
The panel AV Jack is default as “AV In” source. User can use the Encoder Vol Knob to select “OUT”. Once “OUT” is
selected, the panel AV jack is changed as an AV OUTPUT ( AV OUT ) of the Audio / Video Signal of this unit's Built-in
DVD player.
This AV Out selection is useful for user by simply plug and connect to any external TFT system without any
extra installation.
CAMERA
“OFF” is set as default. If user connected a back up camera system to this unit, user should choose Camera “ON” mode.
Once “ON” is selected, & the vehicle is in Reverse Gear ( Backup mode ), the front in-dash TFT display will automatically
switch to Back Up Camera Video signal regardless whatever mode is currently displayed on the front in-dash TFT.
If connected to a back up camera system but this option is selected to “OFF” mode, User still can press the
mode button to switch “AV In 1” to display the Back Up Camera Video on the front in-dash TFT.
TUNER SET
User can use the Encoder Vol Knob to select between Local or Distance mode.This feature is used to designate the
strength of the signals at which the radio will stop during automatic tuning. "Distance" is the default setting, allowing the
radio to stop at a broader range of signals.To set the unit to select only strong local stations during automatic tuning,
rotate the Encoder Vol Knob button until "Local" appears on the display.
TUNER AREA
User can use the Encoder Vol Knob to select the frequency spacing which is most appropriate for the area this unit is
used in, U.S.A. South America, Europe or Oirt. (Russia Band)
BEEP TONE
The beep tone feature allows the selection of an audible beep tone when a button is pressed. "BEEP TONE On" is the
default setting. Rotate the Encoder Vol Knob to select the "BEEP TONE Off" option
PROGRAMMABLE TURN-ON VOLUME (VOL PGM)
This option allows the adjustment of the volume level of the radio will automatically assume when turning on. "VOL
PGM 12" is the default setting.To program a specific turn on volume level, use the Encoder Vol Knob to select
"VOLUME LEVEL” within 5 seconds.
REAR SPEAKER ON/OFF (REAR SPK)
Rear speaker is set to 'ON' by default. If OFF is selected, the rear speaker's audio output will be TURNED OFF.This
function is useful while listening with the HEADPHONE and user doesn't need Rear Speakers sounds output through
rear speakers. Select “ON” to reactivate the rear speakers sound output
:When the Rear Speaker is 'OFF', the Audio Function, 'FADER', will not be functional
INTER AMPLIFIER ON/OFF(INTER AMP)
This is a option selection for user to turn the unit's built-in Amplifier system on or off.“OFF” is the default setting.This
option is useful for user if connected to an external Amplifier & the user does not want audio output of the built-in
amplifier system.
11
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 11