Operation Manual

- Select "Title/Chapter" to jump to the beginning of a specific chapter within a specified title (DVD only) and enter the
title and chapter numbers with the number pad and LEFT/RIGHT direction buttons, as follows:
- Select "Track" to jump to the beginning of a specific track within a non-DVD disc and enter the track number with the
number pad, as follows:
33) ZOOM BUTTON
1. Press ZOOM during normal, slow, or still playback.
2. Pressing the ZOOM button repeatedly increases the magnification
level.Three magnification levels are supported. On each press of
ZOOM, the OSD will flash the following:
3. Pressing the direction buttons causes the zoom point to shift, allowing the zoomed image to be panned
1) Some discs may not respond to the zoom feature.
2) Zooming does not work on subtitles or menu screens included on DVDs.
3) The magnification level and number of available levels vary, depending on the TV TYPE selection in the
Setup Menu.
37) TITLE
1. Press TITLE to invoke Title Menu (DVD only, dependent on authoring of disc).
2. Press direction buttons to highlight selected Title Menu entry.
3. Press OK or PLAY to select the highlighted entry. If the highlighted entry indicates a title, that title will play from
Chapter 1.
36) SUBTITLE
Press SUBTITLE during playback to turn on/off subtitles and to change the subtitles (DVD only).The OSD indicates the
current setting, giving the subtitle track number and the language selected, for example:
1) The first press will show the current subtitle setting selected; subsequent presses toggle to the next subtitle
setting.
2) Some DVDs display subtitles automatically and cannot be turned Off, even if the subtitle function is set to Off.
3) During some scenes, the subtitles may not appear immediately.
4) Some DVDs allow subtitle selections and turn subtitles on or off only via the disc menu.
5) When a disc is replaced, the Set Up returns to the default setting.
23
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 23