Operation Manual

Overview of the components
Commissioning the device
Battery Mode (not supplied)
• Open the battery compartment (25) on the back of the machine by turning the
screw in the direction of OPEN.
• Insert 8 1.5V AA type batteries. Match the polarities correctly (see the inside of
the battery compartment).
• Close the battery compartment (LOCK).
• If the device is not used for a long period of time, remove the batteries to avoid
the „spilling“ of battery acid.
• Always change the battery set completely, do not change just one battery.
Warning: batteries are not to be disposed of together with domestic wastes.
Dispose of the used batteries at the relevant collection bin or at your dealer’s.
Never throw batteries into the fire.
AC Adapter Mode (not supplied)
You can also use the device with an adapter.
1. Insert the AC adapter into a duly installed 230V/50Hz protective contact outlet.
2. Connect the device to the power supply unit by inserting the plug of the supply
unit into the 9 V DC socket (22).
3. If a power supply unit is used, please ensure correct polarity as shown by the
inscription on the device.
4. If you have connected a power supply unit, the batteries are automatically swit-
ched off.
35
GB
1 Carrying belt
2 CD compartment
3 CD compartment flap
4 PROG button
5 REPEAT button
6 REW button (fast rewind)
7 F.FWD button (fast forward)
8 VOLUME / volume regulator
9 Function selector switch
ON/OFF POWER
10 STOP button
11 PLAY/PAUSE button
12 Regulator TUNING
13 OPEN / button for opening the CD
compartment
14 Frequency scale
15 LED display
16 Function selector switch
(FM ST./AM/CD)
17 ST. control lamp
18 REP control lamp
19 PROG control lamp
20 POW. control lamp
Reverse side
21 PHONES (Headphone connection)
22 DC 9 V socket
23 Foot
24 Suspension device
25 Battery compartment
5....-05-DR 564 CD 09.05.2003 11:47 Uhr Seite 35