Operation Manual

General safety instructions

Use the device only for the intended purpose.

Assemble the device in such a way that the available ventilation openings are not

covered.

Never open the housing of the device. Incorrect repairs can constitute a considera-

ble risk for the user. Should the device become damaged, in particular the mains

supply cable, do not operate the device any longer, but rather have it repaired by an

expert. Check the mains supply cable regularly for damage.

For safety reasons a broken or damaged mains lead may only be replaced by an

equivalent lead from the manufacturer, our customer service department or a

similary qualified person.

If the device is not used for a longer period, remove the plug connector from the

plug socket or take out the batteries.

These symbols may be found on the machine and are intended to indicate the

following:

The lightning symbol should advise the user of parts in the inside of the

device which carry dangerously high voltage levels.

The symbol with an exclamation mark should advise the user of important

operation or maintenance instructions in the accompanying documentation.

Devices bearing this symbol work with a „class 1 laser“ for tracing the CD.

The built-in safety switches should prevent the user being exposed to dan-

gerous laser light, which is invisible to the human eye, when the CD com-

partment is opened.

Under no circumstances should these safety switches be bypassed or manipulated,

as this could result in a danger of exposure to the laser light.

Overview of the components

1 POWER On/Off switch 6 Siren button

2 Regulator TUNING 7 Hanger

3 VOL Volume regulator 8 Suckers

4 AM/FM band selector 9 Seal screw for the

5 Loudspeaker battery compartment

10 Battery compartment

5....-05-DR 572 28.08.2003 14:41 Uhr Seite 20