Operation Manual

Inserting the Batteries
(not supplied)
To open the battery compartment, remove the screw (9) on the back of the
device.
Pull the plastic cover downwards and open the battery compartment.
Insert 3 1.5V AA type batteries. Match the polarities correctly (see the inside of
the battery compartment).
Close the device by proceeding in the opposite order.
If the device is not used for a long period of time, remove the batteries to avoid
the spilling of battery acid.
Always change the battery set completely, do not change just one battery.
Warning: batteries are not to be disposed of together with domestic wastes.
Dispose of the used batteries at the relevant collection bin or at your dealers.
Never throw batteries into the fire.
Commissioning the device
Switch the device on using the POWER switch (1) by pressing the middle of the
"diving goggles".
The desired frequency band can be set with the band selector switch (4).
UKW = FM, medium wave = AM.
Turn the TUNING regulator (2) to the desired station.
By turning the VOL regulator (3) you can set the desired volume.
Switch the device off again after use by means of the POWER switch (1).
There are three ways for mounting:
1. Use the suckers (8) to stick to a smooth surface, e.g. tiles.
2. Use a hook (7) if you prefer to block it with screws (Screws not supplied).
3. Use a cord to hang it from the water faucet.
Splash-proof
The appliance is splash-proof. It can be used also inside the shower box. Do not dip
it in water (e.g. in the bathtub), as the electronic parts of the appliance may be
damaged.
Siren
With the button (6) you can activate an integrated siren to call for help, for example
in the case of a bathing accident.
21
GB
5....-05-DR 572 28.08.2003 14:41 Uhr Seite 21