Operation Manual

56
Setting up and connecting
Intended use The DVD-Player is solely intended for the following tasks:
 Playing of Video DVD/Video CD.
 Playing of Audio-CD.
Any other use is considered non-intended use and is prohibited.
Defect If the machine should become defective at some point:
 If the power supply cable for this appliance is damaged, it must
be replaced by the manufacturer or his customer services, in
order to avoid hazards.
 Should fluid have seeped into the player or if the player has been
dropped down or damaged in any other way, the player must be
examined by an authorized dealer. Disconnect the player from
the power supply and consult an authorized dealer.
Setting up and connecting
Unpacking Unpack the appliance and all accessories and check that the
contents are complete. You will find information about the scope of
delivery on Page 49, "Device parts/Scope of delivery".
Setting up 1. Place the player on a stable, heat resistant, horizontal and level
surface. Keep a distance of at least 10 cm from walls and objects.
2. Connect the machine to an earthed socket.
ATTENTION:
Always transport/send the player in its original packaging to
prevent it from being damaged. Keep the packaging for this
purpose.
Dispose of unnecessary packaging material in accordance with
the regulations applicable in your country.
NOTE:
Get in touch with your dealer immediately if you notice damage
caused by transport.
Layout Clatronic.book Seite 56 Donnerstag, 9. Februar 2006 9:41 09