Operation Manual

Precautions
If there is noise interference on the TV while a
broadcast is being received
Avoid placing the player in areas of:
direct sunlight or heating radiators, or closed automobiles
high temperature (over 35 C) or high humidity (over 90%)
excessive dust
vibration, impact or where the surface is tilted as the internal parts may be seriously damaged.
i
i
i
i
0
When the player is not being used, set the player to the standby mode.
When left unused for a long period of time, the player should be unplugged from the household AC outlet.
i
i
Keep the player away from flower vases, tubs, sinks, etc. If liquids are spilled into the player, serious damage could occur.
Keep magnetic objects such as speakers, at a distance from the player.
i
i
Place the player in a horizontal position, and do not place anything heavy on it.
Do not place the player on amplifiers or other equipment which may become hot.
moisture may form on the lens in the following conditions:
immediately after a heater has been turned on.
in a steamy or very humid room.
when the player is moved from a cold environment to a warm one.
If moisture forms inside this player, it may not operate properly. In this case, turn off the power and wait about one hour for the
moisture to evaporate.
i
i
i
Depending on the reception condition of the TV, interference may appear on the TV screen while you are watching a TV broadcast
and the player is left on. This is not a malfunction of the player or the TV. To watch a TV broadcast, set the player to the standby
mode.
i
i
Touching internal parts of this player is dangerous, and may cause serious damage to the player. Do not attempt to disassemble
the player.
Do not put any foreign object on the disc tray.
i
i
i
i
i
i
i
i
Hold the plug firmly when connecting or disconnecting the AC power cord.
Do not connect or disconnect the AC power cord when your hands are wet.
Keep the AC power cord away from heating appliances.
Never put any heavy object on the AC power cord.
Do not attempt to repair or reconstruct the AC power cord in any way.
Remove dust, dirt, etc. on the plug at regular intervals.
If the player has been dropped or otherwise damaged, set the player to the standby mode and disconnect the AC power
cord.
If the player has fumes, odours or noise, set the player to the standby mode and disconnect the AC power cord.
Please read these precautions before operating this player.
To avoid any malfunctions of the player, and to protect against electric shock, fire or personal injury, please observe the following.
Power Cord Protection
Placement
Non-use periods
No fingers or other objects inside
Keep away from water and magnetic object
Stacking
Condensation
33