Operation Manual

!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
Open the cassette door by pressing the CASSETTE
STOP/EJECT button (in some cases, you may have
to press the CASSETTE STOP/EJECT button twice
since this button has combined functions).
Insert the cassette, with the exposed tape facing
downwards, into the tracks in the cassette door.
Close the cassette door.
Check the position of the FUNCTION SWITCH to
make sure it is in the TAPE position.
Press down the CASSETTE PLAY button.
Adjust the VOLUME CONTROL to your listening
preference.
To stop the tape manually, press the CASSETTE
STOP/EJECT button.
To remove the cassette, press the CASSETTE
STOP/EJECT button again and the cassette door will
open.
Unload the cassette tape, reverse it and return to
cassette compartment if you want to play the other side
of the cassette tape.
Disconnect the AC power cord from the AC outlet if
the unit is not going to be used for a long period of
time (2 weeks or more).
Do not leave any tape buttons down when the set is
not in use, or else the pinch roller could be damaged.
Load a cassette tape into the cassette compartment.
Load the disc and close the DVD DOOR.
Set the FUNCTION SWITCH to DVD position.
Press the CASSETTE PAUSE button.
Press the CASSETTE RECORD button and PLAY button
for record stand-by.
Start the DVD playing by pressing the DVD
PLAY/PAUSE button.
Release the CASSETTE PAUSE button when you wish
to start the recording.
Press the CASSETTE STOP/EJECT button to stop the
recording.
To hear what you recorded, press REWIND button firstly
and then PLAY button.
Follow the instruction to play the radio.
Load the cassette tape into the cassette compartment.
Locate the portion of the tape where you desire to start
recording by :
1. Finding the start of the tape by using the Rewind feature
(or Fast Forward).
2. Tune into the station you want to record, press the
Cassette Record button and Cassette Play button
simultaneously. Both buttons should remain in their
depressed positions when releases.
- You are now recording from the Built-in Radio and the tape
CAUTION:
TO RECORD FROM DVD DISC
TO RECORD FROM BUILT-IN RADIO



recording process will automatically stop at the end of the
tape.
- To stop the recording manually, press the Cassette
Stop/Eject Button.
NOTE: When you want to play the cassette tape after
recording, press CassetteStop/Eject button first, then press
Rewind button, and finally press Cassette Play button.
Adjust Volume Control to your taste.
MIC MIXING JACK
NOTE:
HEADPHONE JACK
CAUTION:
This jack accepts any dynamic microphone has its
impedance between 600 and 300 ohms, with 6.5mm
diameter standard plug. Voice through external
microphone to mix with another sound source while
playing or selected. Adjust VOLUME CONTROL to your
listening preference.
Always disconnect the external microphone
when it is not in use.
For private listening, insert a 3.5mm headphone (not
included) into the HEADPHONE JACK .
The speakers are automatically cut off.
Listening at high power for a long moment
could damage user' ears.
!
! Mic. Mixing function is available for TAPE,
CD/VCD modes.
Record options
53