Operation Manual

ENGLISH
ENGLISH
32
3. Select the next track with the SKIP DOWN/SKIP UP key and
press the PROGRAM key again. Repeat the procedure until
all the desired tracks are selected.
Note: With CDs in MP3 format a maximum of 10 titles can
be programmed.
4. Press the PLAY/PAUSE key (14/1). The playback starts.
The selected track numbers are shown in the display in the
correct order and the symbol  or  MP3 and PROGRAM
light up. Press this button to pause briefl y the playback.
5. Press once the STOP
key (17/2) to stop the playback while
retaining the program.
6. To resume the playback of the program press fi rst the
PROGRAM key (9/6) once and then the PLAY/PAUSE key
(14/1).
7. In order to delete the programme, hold the STOP key
(9/6) down for approximately 3 seconds in stop mode. The
PROGRAM control lamp goes out.
The device stops automatically once the entire sequence of
programmed tracks is completed. The programmed order of
tracks remains in the memory until you change to a different
mode, remove the CD from the CD compartment or switch off
the device.
It is also possible to combine the programmed tracks with the
REPEAT function. After you have programmed and started the
device, please press the MODE button (10) up to three times
and then you can use the functions as described under „MODE“.
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music in
MP3 format. The device also supports all standard CD types:
CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machine
detects an MP3 CD automatically (the total number of tracks
and MP3s appears in the display). If you would like to play one
of these CDs, proceed as described under „Playing CDs/MP3“.
Tracks can be programmed as described under „Playing Back
Programmed Tracks“.
Please note:
There are a number of different recording and compression
methods, as well as quality differences between CDs and self-
recorded CDs.
Furthermore, the music industry does not adhere to fi xed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is not a
malfunction of the device.
Cleaning and Maintenance
• Always remove the mains plug before cleaning the machine.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
Troubleshooting
Symptoms Course Solution
CD can not be
played back.
CD is not inserted
or inserted incor-
rectly.
Ensure that the
disc is inserted with
the label facing
upwards.
CD jumps during
playback.
Check the disc for
fi ngerprints, dirt or
scratches.
Check the disc for
fi ngerprints, dirt or
scratches.
Technical Data
Model: ...........................................................MC 1028 CD/MP3
Power supply: ........................................................ 230 V, 50 Hz
Output rating:........................................................ 100 W PMPO
Protection class: ...................................................................... ΙΙ
Radio section:
Frequency ranges: ............................. FM 88,0 ~ 108,0MHz
................................ AM 540 ~ 1600 kHz
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
Guarantee
The device supplied by our Company is covered by a 24 month
guarantee starting on the date of purchase (receipt).
During the life of the guarantee any fault of the device or its
accessories ascribable to material or manufacturing defects will
be eliminated free of charge by repairing or, at our discretion, by
replacing it. The guarantee services do not entail an extension
of the life of the guarantee nor do they give rise to any right to a
new guarantee!
Proof of the guarantee is provided by the proof of purchase.
Without proof of purchase no free replacement or repair will be
carried out.
If you wish to make a claim under the guarantee please return
the entire machine in the original packaging to your dealer
together with the receipt.
Defects to consumables or parts subject to wearing as well as
cleaning, maintenance or the replacement of said parts are not
covered by the guarantee and hence are to be paid!
The guarantee lapses in case of unauthorized tampering.
After the expiry of the guarantee
After the expiry of the guarantee repairs can be carried by the
competent dealer or repair service against the payment of the
ensuing costs.
05-MC 1028 CD 32 28.07.2006, 10:06:17 Uhr