Operation Manual

GB
40
Special safety information
This device works with a class 1 laser.
Overview of the Components
1 REPEAT button 15 Loudspeaker
2 REPEAT control lamp 16 TUNING control
3  (stop) button 17 LED display
4 I button (reverse search) 18 CD/FM Function selection switch
5 I button (forward search) (CD / RADIO)
6 Sensor for the remote control 19
Headphone connection
7  II (play/pause) button 20 Volume Display
8 PROGRAM button
(CD programming)
Remote Control
9 VOLUME (volume control) 1  II (play/pause) button
10 OPEN CD compartment 2  (stop) button
11 CD compartment 3 I / I buttons
12 PLAY/PAUSE control lamp (reverse search/forward search)
13 Station scale 4 REPEAT button (repeat)
14 PROGRAM control lamp 5 PROGRAM button
Start-up of the device/introduction
• Read the operating instructions thoroughly before the start-up!
• Select an appropriate location for the device, e.g. a dry, fl at, non-slip surface
on which the device can be easily operated.
• Make sure that the device is adequately ventilated!
Power supply
• Connect the power cable supplied to a properly installed 230 V/50 Hz safety
power socket.
• Ensure that the voltage is the same as that indicated on the model identifi cati-
on plate.
Remote Control
– Inserting the Batteries (not supplied)
• Open the lid of the battery compartment on the back of the remote control.
• Insert 2 batteries of type R03 „AAA“ 1.5V. Please ensure that the polarity
is correct (see the fl oor of the battery compartment or the inscription on the
outside)!
05-MC 692 CD 40 20.10.2005, 14:14:44 Uhr