Operation Manual

Programmed Repeat with the PROGRAM Button

This can be used to program any desired sequence of tracks.

1. Press the  (stop) key (3/2).

2. Press the PROGRAM key (8/5). „0“ ﬂ ashes in the display (17) together with

the PROGRAM control lamp. Use the I / I buttons (5/4/3) to select the

desired track and then press the PROGRAM button (8/5) again.

3. Select the next track with the I / I buttons (5/4/3) and press the

PROGRAM button again. Repeat the procedure until all the desired tracks are

selected.

4. Press the  II key (7/1). The playback starts. The selected track numbers are

shown in the display in the correct order. Press this button to pause brieﬂ y the

playback.

5. Press once the  (stop) key to stop the playback while retaining the program.

6. To resume the playback of the program press ﬁ rst the PROGRAM key (8/5)

once and then the  II key (7/1).

7. To delete the program (in stop mode) ﬁ rst press the PROGRAM button (8/5)

and then the  (stop) button (3/2).

The device stops automatically once the entire sequence of programmed tracks

is completed. Programming is also deleted if the CD is removed from the CD

compartment or the machine switched off.

It is also possible to combine the programmed tracks with the REPEAT function.

After you have programmed and started the device, please press the REPEAT

button (1/4) up to three times and then you can use the functions as described

under „REPEAT“.

Please note these instructions for playing back CDs and CDRs in MP3

format! The device is not able to play back MP3 ﬁ les. The CD begins to turn,

but the sound cannot be heard.

Please note:

There are a number of different recording and compression methods, as well as

quality differences between CDs and self-recorded CDs.

Furthermore, the music industry does not adhere to ﬁ xed standards (copy

protection). For these reasons that there may occasionally be problems with the

playback of CDs. This is not a malfunction of the device.

Cleaning and Maintenance

• Always remove the mains plug before cleaning the machine.

• Any marks on the surface can be wiped off with a slightly damp cloth without

any additives.

05-MC 692 CD 43 20.10.2005, 14:14:46 Uhr