Operation Manual

ManualsBrandsClaude Bernard ManualsAMCB 01002

International Claude Bernard Warranty

Congratulations on having chosen a Claude Bernard timepiece. To ensure your timepiece operates perfectly, we

recommend that you follow the advice given in these instructions.

The warranty of your Claude Bernard watch is valid for a period of 24 months effective from the date of purchase

and under the terms and conditions of the present warranty. The international Claude Bernard warranty covers

material and manufacturing defects existing at the time of delivery of the purchased Claude Bernard watch. The

warranty only comes into force if the warranty certificate is dated, fully and correctly completed and stamped by

an official Claude Bernard retailer.

During the warranty period and by presenting the valid warranty certificate, you will have the right to have any

defect repaired free of charge. In the event that repairs are unable to restore the normal conditions of use of your

Claude Bernard watch, Claude Bernard guarantees its replacement by a Claude Bernard watch of identical or

similar characteristics.

The warranty for the replacement watch ends 24 months after the date of purchase of the replaced watch.

The manufacturer’s warranty does not cover:

- The battery

- The glass

- The leather strap.

- Normal wear, and tear and ageing (for example scratched crystal, alteration of the colour and/or material of non

metallic straps and chains, such as leather, rubber).

- Any damage on any part of the watch resulting from abnormal/abusive use, lack of care, negligence, accidents

(knocks dents, crushing, broken crystal, etc.), incorrect use of the watch and non-observance of the operating

instructions provided by Claude Bernard.

- The Claude Bernard watch handled by non-authorized persons (for example for battery replacement, service or

repair) or which has been altered in its original condition beyond Claude Bernard’ control.

Summary of content (6 pages)

PAGE 1
International Claude Bernard Warranty Congratulations on having chosen a Claude Bernard timepiece. To ensure your timepiece operates perfectly, we recommend that you follow the advice given in these instructions. The warranty of your Claude Bernard watch is valid for a period of 24 months effective from the date of purchase and under the terms and conditions of the present warranty.
PAGE 2
- Claude Bernard watches bought from non authorized retailers since Claude Bernard is not able to check if the watches were handled and stocked correctly. Any further claim against Claude Bernard, for example for damages additional to the above described warranty is expressly excluded, except mandatory statutory rights the purchaser may have against the manufacturer.
PAGE 3
VARIOUS INFORMATION Mechanical watches The mechanical Claude Bernard watch with an automatic movement does not need to be wound by hand. The motion of your wrist makes the rotor (oscillating weight or mass) turn, thereby winding up the mainspring of the watch movement. The everyday activity of life is sufficient in itself to wind up an automatic Claude Bernard watch and it will run continually, even if it is removed at night. However, if not worn for approximately 40 hours, it will stop.
PAGE 4
1. Normal position (wearing position): when the crown is positioned against the case, the crown ensures that the watch is water-resistant. Occasional winding: if the watch has not been worn for more than 42 hours or more, wind it up with the crown in position 1. 2. Correcting the date: pull the crown out to position 2, turn the crown backwards (forwards for references 83) and push it back to position 1.
PAGE 5
After setting the hands to their original positions, return to crown position 1. Claude Bernard 10 Watch function: The crown has 3 positions: 1. Normal position (wearing position): when the crown is positioned against the case, the crown ensures that the watch is water-resistant. 2. Correcting the date: pull the crown out to position 2, turn the crown forwards and push it back to position 1. 3. Time setting: hours, minutes and seconds. Pull the crown out to position 3. The seconds hand will stop.
PAGE 6
2. Time setting: hours, minutes and seconds. Pull the crown out to position 3. The seconds hand will stop. Turn the crown forwards or backwards. Synchronise the seconds by pushing the crown back to position 1 to coincide with a given time signal. Claude Bernard 34 Watch functions: The crown has 3 positions: 1. Normal position (wearing position): when the crown is positioned against the case, the crown ensures that the watch is water-resistant. 2.