Specification Sheet
7
www.clausing-industrial.com | 800.323.0972
VERTICAL KNEE MILL ACCESSORIES
R-8 ROUND
COLLET SETS
POWER FEEDS
POWER DRAWBAR
DRO203
INNOVA 40i
DP700 DIGITAL
READOUT
Part No. Description Approx.
Weight
Z384-SET-1 R-8 Metric Set 2mm–20mm by 1mm, 19 Collets
15 lbs.
Z384-SET-5 R-8 Inch Set 1/8”–3/4” by 32nds, 21 Collets
18 lbs.
Z384-SET-6 R-8 Inch Set 1/8”–3/4” by 16ths, 11 Collets
10 lbs.
Z384-SET-7 R-8 Inch Set 1/8”–3/4” by 8ths, 6 Collets
7 lbs.
Part No. Description and Model Approx. Weight
2VSX150 X-Axis Servo Feed for 2VS, 3VS & 4VSQ 20 lbs.
2VSXA X-Axis Align Power for 2VS, 3VS & 4VSQ 20 lbs.
2VSY150 Y-Axis Servo Feed for 2VS, 3VS & 4VSQ 20 lbs.
2VSYA Y-Axis Align Power for 2VS, 3VS & 4VSQ 20 lbs.
2VSK140 Knee Servo Feed for 2VS & 3VS 20 lbs.
2VSKA Knee Align Power for 2VS, 3VS & 4VSQ 20 lbs.
Part No. Description and Spindle Approx. Weight
2VS8408 Power Drawbar for R-8 Spindle 25 lbs.
2VS8430 Power Drawbar Kit for #30 Spindle 25 lbs.
2VS8440 Power Drawbar Kit for #40 Spindle 25 lbs.
DRO Features
• 2 or 3 axes
• Crystal-Clear 7” color display
• Feed Rate Display
• Multiple Language Support
• Absolute/Incremental
• Near-Zero Warning
• Help Function
• 16 Tool Offsets/Diameter
• Preset and zero reset
• 4 Function Calculator/Trig
Calculator
DRO Features
• Linear and angular axes
• Easy setup and diagnosis
• Feedback signal monitoring
• Linear and multi-point
compensation
• Radius or diameter display
• Preset and zero setting of the axes
• Incremental and distance-coded
reference marks
• Tool radius compensation
• Direct mm/inch conversion
• Fine/coarse axis resolution
• Buzzer
• Absolute / Incremental
measurement
DRO Features
• Rugged Die-Cast Chassis
• Feather-Touch, Cap-Sense Keypad
• 5.7” QVGA Blue STN with CCFL
Backlight
• 2, 3 or 4 Axes with Optional Rotary
Axis
• Graphical Tool Path Verication
• Customized Canned Cycles
• Remote Storage via USB Port
• CMM / Inspection Functions with
Probe Capabilities
• Feed Rate Display
• Polar Co-ordinate Readings
• Instant Inch/mm conversion
• Position-TracTM
• Bolthole pattern calculations with
graphics (full and partial circles/
linear patterns)
• Centerline calculation enables you
to establish workpiece zero and
midpoints
• Edge nder input
• I/O (option)
• Easy software update through
USB adapter
• Alarms for excessive feed rate
and travel limit overrun
• “Display OFF” mode
• Calculator
• 3D color display of tool path
• Bolt-hole drilling calculation
• Up to 50 part references (datum
points)
• Linear drilling calculation
• Part centering
• Part alignment
• Axis coupling
• Touch Probe Input
• Teach Mode with Graphics
• Intuitive Help Menus
• Bolt Hole Circle Routine (full and
partial)
• Line Hole
• Frame (Pocketing)
• Grid Array
• Arc Function
• Tool Length Compensation
• Tool Diameter Compensation
• Tap Drill Library
An industry standard in digital
readout systems, the Acu-Rite
DRO203 offers state-of-the-art
features for milling applications.
DRO for 2, 3 and 4 axes
milling machines
Setting new
performance standards
R-8 Round Collet Sets
Part No. Description
Z384-SET-1
R-8 Metric Set 2mm - 20mm by 1mm, 19 Collets
Z384-SET-5
R-8 Inch Set 1/8" - 3/4" by 32nds, 21 Collets
Z384-SET-6
R-8 Inch Set 1/8" - 3/4" by 16ths, 11 Collets
Z384-SET-7
R-8 Inch Set 1/8" - 3/4" by 8ths, 6 Collets
Power Feeds
Part No. Description and Model Weight
2VSX150 X-Axis Servo Feed for 2VS, 3VS & 4VSQ 20 lbs.
2VSXA X-Axis Align Power for 2VS, 3VS & 4VSQ 20 lbs.
2VSY150 Y-Axis Servo Feed for 2VS, 3VS & 4VSQ 20 lbs.
2VSYA Y-Axis Align Power for 2VS, 3VS & 4VSQ 20 lbs.
2VSK140 Knee Servo Feed for 2VS & 3VS 20 lbs.
2VSKA Knee Align Power for 2VS, 3VS & 4VSQ 20 lbs.
Part No. Description and Spindle Weight
2VS8408 Power Drawbar for R-8 Spindle 25 lbs.
2VS8430 Power Drawbar Kit for #30 Spindle 25 lbs.
2VS8440 Power Drawbar Kit for #40 Spindle 25 lbs.
Power
Drawbar
ACU-RITE
®
200S Digital
Readout
As the industry standard
in digital readout
systems, the Acu-Rite
200S offers state-of-the-
art features for milling applications.
• 2 or 3 axes
• 5.7” Transmissive LCD display
• Feed Rate Display
• Multiple Language Support
• Absolute/Incremental
• Near-Zero Warning
• Help Function
• 16 Tool Offsets/Diameter
• Preset and zero reset
• 4 Function Calculator/Trig
Calculator
• Instant Inch/mm conversion
• P
osition-TracTM
• Bolthole pattern calculations
with graphics (full and partial
circles/linear patterns)
• Centerline calculation enables
you to establish workpiece zero
and midpoints
• Edge finder input
• I/O (option)
DRO Features
Innova 40i
DRO for 2, 3
and 4 axes
milling
machines
• Linear and angular axes
• Easy setup and diagnosis
• Feedback signal monitoring
• Linear and multi-point
compensation
• Radius or diameter display
• Preset and zero setting of the axes
• Incremental and distance-coded
reference marks
• Tool radius compensation
• Direct mm/inch conversion
• Fine/coarse axis resolution
• Buzzer
• Absolute / Incremental
measurement
• Easy software update through
USB adapter
• Alarms for excessive feed rate
and travel limit overrun
• "Display OFF" mode
• Calculator
• 3D color display of tool path
• Bolt-hole drilling calculation
• Up to 50 part references
(datum points)
• Linear drilling calculation
• Part centering
• Part alignment
• Axis coupling
DRO Features
• Rugged Die-Cast Chassis
• Feather-Touch, Cap-Sense
Keypad
• 5.7" QVGA Blue STN with CCFL
Backligh
t
• 2, 3 or 4 Axes with Optional
Rotary Axis
• Graphical Tool Path Verification
• Customized Canned Cycles
• Remote Storage via USB Port
• CMM / Inspection Functions with
Probe Capabilities
• Feed Rate Display
• Polar Co-ordinate Readings
• Touch Probe Input
• Teach Mode with Graphics
• Intuitive Help Menus
• Bolt Hole Circle Routine (full and
partial)
• Line Hole
• Frame (Pocketing)
• Grid Array
• Arc Function
• Tool Length Comp
ensation
• Tool Diameter Compensation
• Tap Drill Library
DRO Features
DP700 Digital
Readout
Setting new performance
standards
7