Owner`s manual

Page 10
Selecting the trigger input type
1. Press the SYSTEM button once, to the left of the SYSTEM INDICATOR bar. The first segment will
light up.
System Sound
DUMP
ASSORTED
EFFECT
HI HAT
CYMBAL
PERCUSSION
TOM
RIM
SNARE
KICK
MIDI
BUTTON
OPT
NOTE P
NOTE #
OUT B
OUT A
DYN
THRES
TRIG INPUT
SYSTEM
(If not, press the SYSTEM button repeatedly until the TRIG INPUT LED lights up or hold the SHIFT
button while pressing SYSTEM to scroll downwards).
2. Press one of the CHANNEL buttons, e.g. the KICK button. This will trigger a sound and it will
also select the channel for editing. This is indicated with a steady light from the
TRIGGER
indicator.You can also select a channel by hitting a pad, however once you select a channel by
pressing a
CHANNEL button, the pad select is disabled. To enable it again, press EXIT and go back
to edit mode.
KICK
PALETTE
4
2
3. The DISPLAY will indicate the trigger source of the selected channel. If you turn the ROTARY
dial, you will scroll through the possible trigger sources that have been implemented in the
ddrum4. These trigger sources have their respective characteristics and by selecting the most
appropriate for each channel, the ddrum4 will perform at its best. Please turn to page 14 for
more details regarding the trigger options.
4. To select another channel for editing, just press any other
CHANNEL button. The steady TRIG-
GER light will indicate which channel is selected for editing.
5. To leave the System mode, press the
EXIT button. You will find EXIT to the left of the ROTARY
dial.
EXIT
KIT STORE
Selecting trigger input type