Owner`s manual

Page 17
ddrum trigger microphone. If you get multiple triggers, try to raise the threshold on the
ddrum4 channel or select Ac2.
Ac2 This one is slightly less trigger sensitive than Ac1. Try this one if you are triggering
ddrum4 with a ddrum trigger microphone mounted on acoustic toms or kick drums.
Ac3 This is the least trigger sensitive selection. It is designed for triggering ddrum4 with
long, sustained acoustic drum sounds.
CYb Use this one if you are triggering with a ddrum cymbal controller pad.
HHt This is used if you have the ddrum Hi-Hat controller. This controller should be connected
to input number 10 on the ddrum 4.
• When you connect a hi-hat pedal for the first time, and select this trigger type, the ddrum4
needs to be calibrated to the hi-hat pedal. While you are in trig input mode for channel 10,
close the pedal (don’t press too hard) and press
SHIFT-EXIT. The display will confirm the
calibration by showing CAL. If you connect another hi-hat pedal or change the clutch, you will
have to calibrate again.
Thres
System Sound
DUMP
ASSORTED
EFFECT
HI HAT
CYMBAL
PERCUSSION
TOM
RIM
SNARE
KICK
MIDI
BUTTON
OPT
NOTE P
NOTE #
OUT B
OUT A
DYN
THRES
TRIG INPUT
SYSTEM
The threshold can prohibit weak or stray trigger signals from triggering a channel. If e.g. your
toms trigger the snare as well or if your monitor speakers are loud enough to actually trigger
sounds, increase the threshold on the channel that receives external triggering. The higher you
set the threshold value, the less sensitive the channel becomes.
Values: 1 ~ 100, the default value is 15.
Dyn
System Sound
DUMP
ASSORTED
EFFECT
HI HAT
CYMBAL
PERCUSSION
TOM
RIM
SNARE
KICK
MIDI
BUTTON
OPT
NOTE P
NOTE #
OUT B
OUT A
DYN
THRES
TRIG INPUT
SYSTEM
This function can adjust the dynamics response of each channel. The number indicates one of
the dynamic response curves. The default value is 0, which is a linear type of curve. By turn-
ing the
ROTARY dial counter-clockwise, a negative number appears, indicating that medium-
soft to medium-hard hits will be less pronounced. Turning clockwise will select the positive
curves, where those hits will be more pronounced. See the figure in the appendix section.
Values: -15 ~ 0 ~ 15.
Reference: System