Owner`s manual

Page 24

Shift-Sound

SOUND

This selects a single sound for removal from the sound memory. It defaults to the very last

sound that you have triggered with a channel button. Select a sound with the

ROTARY dial. To

quickly jump between sound groups, press and hold the

SOUND button while turning the ROTARY

dial. A dot in the right corner of the display indicates that the sound is used in the Palette or in

one or more of the Kits.

Shift-Size

VARIATION

SIZE

This indicates the size of the sound you have selected in the above mentioned function. This

information could be useful if you are planning to load any new sounds into your ddrum4.

Shift-Mem.Left

PITCH

MEM. LEFT

This indicates the available, empty space in the sound memory in blocks. One block is very

close to a kilobyte. If, e.g. you have a sound in a computer that is 34,2 kilobytes in size, you

will need 35 blocks of free space in the ddrum4. Please note that the memory left indication

also includes any sounds that are marked for removal. This is indicated with a flashing dis-

play. In that case, the number in the

DISPLAY indicates the memory that will be free, but not until

you have performed the delete procedure. There are 8128 blocks in the original ddrum4 sound

memory. Any number of blocks above 999 is indicated by a digit, a period and two more

digits. If e.g. 6240 blocks would become free, this would be indicated as 6.24 in the display.

Shift-Listen

DECAY

LISTEN

Pressing this will play the sound that you have selected with the SHIFT-SOUND button, described

earlier in this section. The sound will be played through outputs A1 and A2.

Reference: Shift functions