Owner`s manual

4. Editing Programs: Copying Programs NORD ELECTRO 2 V3.0x
Page 18
COPYING PROGRAMS
Copying a Program from one memory location to another is just a variation of storing:
1. Select the Program you want to copy. Press the S
TORE
button
once. The Bank and Program number starts flashing in the D
IS-
PLAY
1. Select Bank (A-F) by pressing the U
P/DOWN NAVIGATOR
but-
tons (if you want to change Bank) and then Program location
by pressing the corresponding P
ROGRAM
button (1-8). As you scroll through the memory loca-
tions, you can play and hear the Program currently shown in the D
ISPLAY
. This prevents you
from overwriting a sound that you want to keep. (To cancel the operation, press any button,
except for the S
HIFT, PROGRAM, STORE or UP/DOWN
buttons.)
2. Press S
TORE
again to store your Program. The D
ISPLAY
shows the selected memory location and
stops flashing.
DELETING PROGRAMS
There is no command for deleting Programs from the internal memory. What you do to “delete” a Program
is simply saving a new Program (and thus replacing the old Program) in a specific memory location.
DOWNLOADING PROGRAMS VIA MIDI
You can receive MIDI Sysex data for one Program at a time into a selected Program location. For example,
if you use Nord Electro 2 together with a sequencer, it is often practical to record a Sysex Program data
dump in the beginning of your song to download sounds. It’s also possible to receive an entire Program
Bank and even all Program Banks as a bulk (see “Dump” on page 39 and “Receive MIDI Sysex Dumps”
on page 44).