User's Manual

while you are already in a conversation.
 Call divert: this network function enables you to forward
incoming calls to another number you have previously
specified.
 Call barring: The call barring function enables you to bar
calls as needed. When setting this function, you need to use a
network barring code, which can be obtained from the
network operator. If the code is wrong, an error message will
be prompted on the screen. After selecting a call barring
option, continue to select Activate or Deactivate. The mobile
phone will prompt you to input the call barring code and then
contact the network. A moment later, the network will make
a response and send the operation results to the mobile
phone.
 Line switching: Switch to Line 1 or Line 2. By default, Line
1 is used.
 Advanced settings
 Black list: you can set many numbers. When this Black list
is enabled, you won’t receive the calls from the numbers
entered in the Black list.
 Auto redial: Set it to On or Off to enable or disable auto
redial. If you set Auto redial to On, the mobile phone will
automatically redial the number a moment later if the called
party does not reply. The number of auto redial times can be
set to a maximum of 10. In the auto redial period, you cannot
dial other numbers. To end the auto redial process, press the
End key.
Note: This function requires support from the network
operator to which the SIM card is registered.
 IP dial:
You should set the IP number first.
 Background sound:
To set playback settings and effect list.
 Call time reminder: To set single or circle tone in a call to