User's Manual

13
SIM card, you’d better avoid touch the metal area and put it in
places away from electricity and magnetism. Once the SIM card is
damaged, you can not access the GSM/GPRS network.
This mobile phone supports two SIM card at the same time
with two cards standby.
*Remark：Power off your mobile phone before output the SIM
card. Plug-in and plug out the SIM card with the power
connection on is forbidden. Or the SIM card is damaged.
2.1.1Input and output of SIM card
 SIM card often is put in one card slot. You must output it
carefully before assembly.
 Power off the mobile phone, and remove the battery and
other outside power.
 Before put the SIM card into the socket, please power off,
remove the battery, then put the SIM card from the card slot.
2.2 Battery
Battery with 50% of quantity of electrical, you also can use. If
the new batter have to charge within 14 hours ,then remove ,and use
it ,then you return to do for3time enough, the battery will use very
well.
2.2.1 open and arrange
 Open step by step as following：
1. Remove battery cover
2. Remove battery out
 Fix step by step as below：
1.
Install batteries
2. Keep back caver
2.2.2 charged of battery
 At first the charge connect with power supply
 Use charge connect with mobile charge cable (note:
arrowhead point up )
 Here, the charging marks will shining at right on the mobile