User's Manual

10
y
y PT/pt/Pt input method
y Numeric
3. Call Function
After the setup described in the previous sections is completed, you are ready to make and receive calls using the basic information provided in this
section.
Note:
¾ When you are using headset, please plug/unplug the headset gently to avoid damaging the headset jack.
3.1. Phone power on/off
Power on
Press and hold Home Key to turn on the phone. If PIN code is required, please refer to the previous section in this guide.
Power off
In Standby mode, press Home Key to turn off the phone.
3.2. Dialer
When the network carrier is shown on the screen, your phone has entered the Standby mode and you may make or receive calls. If you have installed
two SIM cards, the two network carriers will both appear on the screen.
3.2.1. Direct dial
Press any number key to enter the Dial screen.
Domestic call
Using the stylus, tap the number keys on the touch panel (add area code when calling long distance), and then tap the dial key
or to make
the phone call.
Note:
¾ In single card mode, Only a dial key activated.
¾ In dual card mode, and will dial out with respect to card 1 and card 2.
¾ You may also use actual keypad for entering the phone number.
The screen will show the name and phone number of the person that you are calling. After the call goes through, the screen will show a time meter in
addition to the phone number and/or the name of the person you are calling.