Operator`s manual

Operator's Manual: Model CB-1400
3-3
Installing the Fan Assembly
CAUTION: Ducting the CB-1400 Furnace
is not permitted; it is intended for use as a Unit
Heater ONLY.
1. Refer to Figure 3C.
2. Spin the fan blade to check that it spins freely.
3. Remove the cover of the electrical junction
box.
4. Attach the fan motor electrical cable to the
electrical junction box.
5. Connect the fan motor wires according to the
wiring schematic provided in Appendix B at
the back of the manual.
FIGURE 3C - Fan Installed on
Furnace Cabinet