Operator`s manual

Operator's Manual: Model CB-1400
9-9
Annual Burner Tune-up
Your Clean Burn furnace requires annual periodic maintenance. The burner requires an annual tune-up
--similar to an automotive tune-up--to keep it running in peak condition. The burner tune-up should be
performed by a qualified Clean Burn service technician who has the necessary parts and expertise.
Contact your local Clean Burn dealer to schedule the annual periodic maintenance which is usually
(preferably) performed during warm weather to prepare the furnace for the next heating season. Various
levels of service are provided to fit your particular need.
End of Season Maintenance
ATTENTION: Turn main power to your furnace OFF at the end of the heating season. This will
prevent the oil from being "cooked" in the pre-heater block when it is not in use. Failure to do so may result in
carbon build up in the burner preheater block which will block oil flow.
ATTENTION: EPA regulations allow your used oil to be burned only for "heat recovery." DO NOT operate
your furnace during warm weather just to burn oil, or severe damage to the combustion chamber/heat exchanger
may occur.
Contact your local Clean Burn dealer to schedule your annual burner tune-up. Allow only trained, authorized
service personnel to service your burner.