Specifications

11
PART 3 – ADDITIONAL INFORMATION
3.1 GENERAL:
The in stallation of this appliance shall be mad e in accordance with the
manufacturers’ instructions, as well as in accordance with all Federal, State, Regional, or
Local Laws and / o r Regulations acceptable to th e Authority Having Jurisdiction (AHJ)
and shall b e accomplished only by a qualifi ed, certified, a nd competent heating
technician experienced in making such installations as per NFPA 31, Chapter 4, Sections
4.3.2 and 4.3.3 and the Code s and Re gulations that are listed in Part 1 – Sections 1.4
through 1.4.4 of this bid specification as applicable.
3.1.1 Installation, operation, and maintenance permits may be required by the Authority Having
Jurisdiction (AHJ). It is the responsi bility of the purchaser, designa ted agent, contractor,
or installer of the appliance to check with the AHJ as to the pro per procedures to follow
for the completion of this installation.
3.1.2 Installation inspections of the finished job may also be required by the Authority Having
Jurisdiction (AHJ). It is the responsi bility of the purchaser, designa ted agent, contractor,
or installer of the appliance to check with the AHJ as to the pro per procedures to follow
for the completion of this installation.
3.1.3 On-site certification of the appliance may be required by the Authority Having Jurisdiction
(AHJ). It is the re sponsibility of the purch aser, designated agent, contractor, or installer
of the ap pliance to check with the AHJ a s to th e proper procedures to follow for the
completion of this installation.
3.1.4 All appliances shall be tested and installed in accordance with the Codes and
Regulations that are listed in Part 1 – Section s 1.4 through 1.4.4 of this bid spe cification
as applicable.
3.1.5 All materials utilized in the installation shall be in strict accordance with the Codes and
Regulations that are listed in Part 1 – Section s 1.4 through 1.4.4 of this bid spe cification
as applicable and shall be new and of the best grade and quality.
3.1.6 The bidder must have local service capability to provide on-site service.
3.1.7 The bidder must have current autho rization from Clean Burn,
LLC. to provid e warranty
service.
3.2 OPERATOR MANUALS:
Each appliance comes with one complete CB-1750 Operator’s
Manual included inside of the appliance at time of shipping. Clean Burn, LLC. will supply
up to four additional CB-1750 Operator’s Manuals at no charge for the bidding purpose.
If more copies of CB-1750 Operator’s Manuals are required, they can be ordered through
the local Clean Burn Distributor.