Manualshelf

Operator`s manual

ManualsBrandsCLEAN BURN ManualsFurnaceCB-1800
81828384858687888990
Operator's Manual: Models CB-1400, CB-1800, and CB-2800
A-10
Burner Components (continued)
FIGURE A3 - Burner Electrode Specifications with Spinner Retention Head
V
I
E
W
A
-
A
V
I
E
W
B
-
B
3X
INSTALLATION OF THE SPINNER RETENTION HEAD
THE SPINNER RETENTION HEAD FITS INSIDE THE BURNER TUBE AND
REQUIRES (3) SELF-TAPPING SCREWS. IT IS VERY IMPORTANT THAT
THE SPINNER HEAD IS NOT TIPPED FROM SIDE TO SIDE OR FROM
TOP TO BOTTOM.
3/16" GAP
BETWEEN
ELECTRODES &
NOZZLE
CRITICAL DIMENSION:
NOZZLE MUST BE 1/8"
AHEAD OF THE DISK.
NOZZLE MUST NOT BE
BEHIND THE DISK.
SIDE VIEW -- AA
1/8" SPARK
GAP
FRONT VIEW -- BB
USE PROVIDED SCREWDRIVER AS
WEDGE TO HOLD THE SPINNER
RETENTION HEAD IN POSITION. THEN
TIGHTEN THE THREE SCREWS TO
LOCK THE HEAD IN POSITION.