Operator`s manual

Operator's Manual: Models CB-1500 & CB-2500 (230 V / 50 Hz)
A-8
Figure A3 - Burner Electrode Specifications with Spinner Retention Head
3X
V
IE
W
A
−
A
V
I
E
W
B
−
B
INSTALLATION OF THE SPINNER RETENTION HEAD
THE SPINNER RETENTION HEAD FITS INSIDE THE BURNER TUBE AND
REQUIRES (3) SELF−TAPPING SCREWS. IT IS VERY IMPORTANT THAT
THE SPINNER HEAD IS NOT TIPPED FROM SIDE TO SIDE OR FROM
TOP TO BOTTOM.
USE PROVIDED SCREWDRIVER AS
WEDGE TO HOLD THE SPINNER
RETENTION HEAD IN POSITION. THEN
TIGHTEN THE THREE SCREWS TO
LOCK THE HEAD IN POSITION.
5 mm (3/16") GAP
BETWEEN
ELECTRODES &
NOZZLE
CRITICAL DIMENSION:
NOZZLE MUST BE
3 mm (1/8") AHEAD OF
THE DISK. NOZZLE MUST
NOT BE BEHIND THE DISK.
3 mm (1/8")
SPARK GAP
SIDE VIEW A−A FRONT VIEW B−B
I88850
Burner Components (continued)