Operator`s manual
Operator's Manual: Models CB-1500 & CB-2500 (230 V / 50 Hz)
2-2
Unpacking Items Packed Inside the Furnace
To unpack the items packed inside the furnace cabinet (in the combustion chamber), you will need to
open the combustion chamber door.
1. Remove the four nuts and washers which hold the combustion chamber door closed. Set the nuts
and washers aside in a safe place for later re-installation after the target has been installed
(Section 3).
2. Carefully swing the combustion chamber door open. Remove and inspect the components
packed inside.
3. Leave the door unfastened (open) for assembly/installation procedures to be accomplished in the
next section.
Figure 2A - Accessing the Combustion Chamber
COMBUSTION CHAMBER
CLEANâOUT DOOR
I88881