Service manual

ES526/EX536/EX531/CB2800/ES526L/EX536L/DS316L
Condential
5-5
4. Click "Library".
- Click the "Browse" and navigate to
the directory where you put the DLP
Composer installation les in.
- Click "Library v7.1 0330" folder.
- Click "OK".
5. Click "Communications".
- Select "Serial Port", then click "Congure".
6. "Serial Port Conguration" picture will
appear on the screen.
- Make sure the settings are as below:
(1) In "Baud Rate" item, select "115200".
(2) In "Data Bits" item, select "8".
(3) In "Stop Bits" item, select "1".
(4) In "Parity" item, select "None".
(5) In "RTS" item, select "Enable".
(6) In "CTS" item, select "Disable".
(7) Key in "4000" into "Read" and "Write"
items of "Timeouts (in milliseconds)".
- Click "OK".
7. Click "OK".