Operating instructions

7 8
ASSEMBLY AND OPERATING INSTRUCTIONS
3
Attach gun holder and power cord bracket.
Attach the garden hose to the water inlet(
hand tighten only).
Attach high pressure hose to the machine’s
water outlet (hand tighten only)
4
7
5
Attach high pressure hose to the gun assembly
(hand tighten only).
Insert choice of wand to the gun and twist
¼ turn to lock in position.
6
ON
OFF
ASSEMBLY AND OPERATING INSTRUCTIONS
8
9
12
Attach garden hose to water supply and
turn water on.
Make sure the ON/OFF switch is in the
OFF position.
Completely unwind power cord and plug the
GFCI into an outlet, ensure there are no other
items using this circuit.
Turn switch to ON position.
CAUTION
Drain unit after each use (for
storage): remove water
connection, turn ON the
machine for a few seconds
and press gun trigger to bleed
remaining water in the pump.
Turn OFF immediately.
10 11
Depress trigger until there is a steady
stream of water.