Technical data

Whenelectro-polishing,materialisremovedfromthesurfaceoftheworkpi-
ecebyspecicelectrolytesusedinconjunctionwithanexternalDCsource.
Thematerialsetfreebytheelectrolyteisnon-pollutingandfollowsunder
atteningconditions.Incontrasttomechanicalremovalprocesses,atte-
ningbyelectro-polishingbeginsinthemicrorangeandincludes,during
longerpolishingperiods,largerstructureswhichareroundedandattened
off on their top surface. During electro - polishing, two different mechanisms
worksimultaneously,oneattenstheuppersurfaceinthemicrorangeand
theotherachievesnedeburringinthemacrorange.
3.5.2 Reverse
(11) Main switch
(12) Fuse6,3Amp
(13) Connectingsocketformainscable
Operation Manual Clean Marker Brush − Page 11
11 12 13
11openap(withscrewdriver)
removefuseslider
exchange fuses