Technical data

instructions for use
4 TransPOrT, seTTinG UP
4.1 SAFETY REGULATIONS
4.1.1 Temporary storage
Always keep the unit in its outer packaging and in a dry room indoors.
4.1.2 Unpacking
Withoutusingsharptools,removetheouterpackagingcarefully.
Keeptheoriginalpackaging.Alwaysuseitforstoringandtransportingthe
unit.
4.1.3 Putting the machine into operation
• checkthatthemainsvoltageisthesameasthatonthetypelabelandis
the same as the setting
• usingthemainscableconnecttheunittothemainsvoltage
pushtheredcableintotheredconnectingsocket(5)
• fixtheearthingclamptotheredcableandthenontheworkpiece
• pushtheblackcableintotheblackconnectingsocket(6)
• fixtheotherendofthecableintothetoolforlettering/cleaning
• switchontheunitatthemainswitch(11),theyellowlight(7)should
belit,theunitisready
• settheunitasdesired
5 OPeraTinG
5.1 INITIAL OPERATION
Carryoutacheckandinspection,notonlypriortoinitialoperation,butalso
priortoeverysetup.Setuptheunitasdescribedabove.
Workingwithchemicalscanbedangerous.Alwayswearafacemask,
acid-proofapron,gogglesandgloves.WhenusingGreinox1000/2000/
Polish,RapidpleasereadtheSafetyDataSheetsrst(currentlytobe
foundunderwww.greising.com/CleanMarker/Service).
Donotingestthevapoursarising.Shouldtherebeskincontact,washwith
plenty of water.
Operation Manual Clean Marker Brush − Page 12