Technical data

5.1.1 Unit adjustments for cleaning for Clean Marker Brush devices
selector switch (see page 10)
5.2 CLEANING WITH CLEAN MARKER BRUSH ATTACHMENTS
5.2.1 Tips for maximum cleaning effect
WiththeCleanMarkerbrushattachmentyoucancleaneveninaccessible
parts.Theshortbrushshowsmorepowerfullperformance,thelongbrushis
especiallyforbigareas.Chancethebrushintimetoavoitshortcircuits.
Slag and scale spots can only be removed by blasting
(Clean Marker Brush-T and Brush-TP)
5.2.2 The „Cleaning“ Process
• screwonthebrushattachment
• adjusttheunitaccordingtoChapter5.1.1
• fillabout1cmGreinox1000,2000,PolishorRapidintothewide-neck
containermorecanbefilledintothecontainersforpumpunits
• moistenthetool
• runthetooloverthebloomuntilthesurfaceisclean
To avoid white edges on the work piece: polish the cleaned
work piece with the cleaning cloth supplied, lightly moistened
with water and Neutralyt.
Croping the brush will increase performance.
On level 3 short circuit signs may appear. It may be necessary
to chance down on level 2.
5.3 ETCHING WITH THE CLEAN MARKER (FLAT TOOL)
5.3.1 Tips for maximum etching effect
Everyelectrolytecontainssalts.Dependingonthematerial,thesesalts
canhaveastronglyoxidizingeffect.Extremecleanlinessmustbeusedwhen
handlingthechemicals.Avoidcarry-overofelectrolytesandwashyour
hands frequently. Make sure of good power contact and moist felt. Felt which
istoodryrestrictstheowofpower.Stencilsbecomecloggedwithsaltsand
metalsafterawhile.Theyshouldalsoberinsedandcleanedfrequently.
Electrolytecanalsobeusedforcleaningstencils.Smallsurfacescanbest
Operation Manual Clean Marker Brush − Page 13
A
B
C
D
selector switch
1picklingwithbrush
2picklingwithbrush
3picklingwithbrush*
4picklingwithelectrod*
5 polishing
6darkmarking
7lightmarking*
brushattachment1(A) brushattachment2(B)
marking stencil (C)
+ marking felt 1
marking stencil
60°(D)+cleaningfelt
symbol
*notwithCleanMarkerBrush-E